Storing A Scene In Memory; Recalling/Clearing A Scene In Memory - Kenwood DV-2070 Instruction Manual

DV-2070 lEn/K.
By storing scenes that you want to check later, subsequent playback can be started from any of the stored scenes any time.
Up to 5 scenes can be stored (using the remote control unit only}.
This operation may not be available with certain DVD discs.
Software with which this function is avail-
able: ^
DVD CD VCD
Storing a scene in memory
Press the MEMORY key during playback.
RC
— DVD
— CD
— DVD
SETUP
6^0
p
0
=
• " % "
is displayed in positions where no scene is stored in memory.
Press the ENTER key at the scene you want to store in memory.
RC
..A
o
To store other scenes in memory, repeat following steps
O and © for each.
OSelect a scene with the joystick (<, >).
©Press the ENTER key.
P
0
* * * *
1 1 1
1 2
3[A]t |
L.. J
Recalling/clearing a scene in memory
Press the MEMORY key during playback.
RC
Select the memory number to be recalled or canceled.
RC
To recall and play
OSelect a scene with the joystick (<, >).
© Press the
A
key. »
To clear
Press the C key.
• The scene corresponding to the selected memory number is searched
and playback starts from it
P
w •
1 [_*]3 4
*
U-_
• The scene in the selected memory number is cleared