Page 1
Control box for manual/Control box for motorized STM7-CB STM7-CBA This instruction manual is for the Olympus measuring microscope. To ensure the safety, obtain optimum performance and to familiarize yourself fully with the use of this microscope, we recommend that you study this manual thoroughly before operating the microscope.
Page 2
Refer to your local Olympus distributor in EU for return and/or collection systems available in your country. NOTE: This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
Page 3
Contents Introduction ...............................1 Safety precautions ..........................1 1 Specifications ............................. Proper selection of the power supply cord ..........................6...
STM7 to control the measuring microscope. Contents of instruction manuals This instruction manual is for the control box for manual/motorized STM7-CB/CBA. Please also read the separately available instruction manuals listed below to obtain comprehensive understanding of the microscope operating procedures.
Page 6
Indicates a non-specific general hazard. Follow the cautions given after this symbol or in the instruction manual. Indicates that the main switch is ON. Indicates that the main switch is OFF. When caution labels are dirty or peeled off, contact Olympus for replacement or inquiries.
Page 7
If you touch an insertion port with the caps or seals removed, static electricity from your body could cause devise failure. 6. Do not connect any cable to the CAN1 or CAN2 connector of the control box for manual STM7-CB. Do not connect the autofocus unit MM6C-AF for measuring microscope STM6 to the AF connector of the control box for motorized STM7-CBA.
Specifications Item Specification Illuminator LED type Reflected light illuminator: MM6-ILW control Transmitted light illumination: MM6-ILG Illuminator for focus navigator unit: MM6-ILG Driving current 330 mA ±20 mA(max) Power consumption Approx. 2 W per illumination Average life Approx. 30000 hours (Ambient temperature 20 °C, light intensity level 50%) Pilot lamp ON: The main switch of the control box is turned ON.
Page 9
Even parity Stop bit 2 bit Rating 100-120/220-240 V $ 50/60 Hz 0.3 A/0.2 A (STM7-CB) 100-120/220-240 V $ 50/60 Hz 0.6 A/0.35 A (STM7-CBA) Dimensions and weight 250(W)x300(D)x149(H) mm (excl. projection) Approximately 4.9 kg (STM7-CB) / Approximately 5.4 kg (STM7-CBA) Operating environment Accuracy guarantee Temperature: 20 °C ±1 °C.
If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to “Specifications” and “Certified Cord” below: Caution : In case you use a non-approved power supply cord for Olympus products, Olympus can no longer warrant the electrical safety of the equipment.
Page 11
STM7-CB/CBA Table 2 HAR flexible cord Approval organizations and cordage harmonization marking methods Alternative marking utilizing Printed or embossed black-red-yellow thread (Length harmonization marking (May be of color section in mm) Approval organization located on jacket or insulation of internal wiring)
Page 12
Manufactured by Shinjuku Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0914, Japan Distributed by 48 Woerd Avenue Waltham, MA 02453, U.S.A. 8F Olympus Tower, 446 Bongeunsa-ro, Gangnam-gu, Seoul, 06153 Korea AX8433 02...
Need help?
Do you have a question about the STM7-CB and is the answer not in the manual?
Questions and answers