Miele WTD 160 Installation Manual page 5

Refitting the transit bars

Risk of damage from incorrect
transport.
The washer-dryer may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the washer-dryer is
to be moved (e.g. when moving
house).
Opening the flaps
 Push against the catch with a pointed
object, e.g. a narrow screwdriver.
The flap will open.
Fitting the transit bars
 Install the transit bars in reverse order
to their removal.
Useful tip: If you lift the drum slightly,
the transit bars can be pushed in more
easily.
11694001-01
Installing under a continuous
worktop
Building under kits* must only be
installed/dismantled by a specialist.
- A special building under kit* is
required. The cover plate included in
the building under kit* replaces the lid
of the washer-dryer. It is necessary to
fit the cover plate for electrical safety
reasons.
- Connections for electricity, water and
drainage should be installed in such a
way that they remain accessible
when the washer-dryer is in its final
position.
The building under kit includes
installation instructions.
* Optional accessories
Installation