Advertisement
CX-961
3. DISASSEMBLY
The numeral enclosed by a circle in the drawing
indicates the order of removal.
- How to hold the mechanical unit
1. Hold the top frame and main frame.
2. Do not hold the front of the top frame tightly
because its strength is low.
- How to remove the top frame and main frame
1. Remove the four screws and four springs of the top
Top Frame
frame in the clamped state and remove the top frame.
2. After having removed the screws of the two
dampers and the dampers on the right, remove the
main frame.
3. Remount the product connector with the frame
removed and eject a disk.
Main Frame
Damper
Disk
Damper
Clamper Arm
- How to remove the clamper arm assy and
Assy
guide arm assy
Guide Arm
1. Remove a total of three right, left and rear springs
Assy
and remove the clamper arm assy.
2. Remove the left spring and remove the torsion
spring hook of the right fulcrum part.
3. Remove the E ring of the left fulcrum and remove
the guide arm assy.
17
Advertisement
