Page 2
Saturdays 08h00 to 16h30 GMT+2 Centurion Systems (Pty) Ltd reserves the right to make changes to the product described in this manual without notice and without obligation to notify any persons of any such revisions or changes. Additionally, Centurion Systems (Pty) Ltd makes no representations or warranties with respect to this manual.
Page 3
Any other use, not expressly indicated here, could compromise the service life/operation of the product and/or be a source of danger The installer must explain the operation of the D10 SMART Theft-deterrent Cage • and any safety hazards to the end-user - refer to "Section 5 - Installation Handover"...
Page 4
Centurion Systems (Pty) Ltd cannot be held liable under any circumstance for any damage, loss or action that results from your gate operator being tampered with.
Page 6
SECTION 4 D10 SMART THEFT-DETERRENT CAGE INSTALLATION 4. Theft-deterrent Cage Installation IMPORTANT! In the case where one has the optional magnet origin system fitted, relocate the gate magnet as close as possible to the operator cover and reset the gate limits.
Page 7
SECTION 4 D10 SMART THEFT-DETERRENT CAGE INSTALLATION D10 SMART/ D10 TURBO SMART/ Always unlock the Discus D20 SMART Padlock before placing the Overstrap Front Bar Assembly into position. Align the two holes in the Overstrap with the two holes in the front of the...
Page 8
The CENTURION and CENTSYS logos, all product and brand names in this document that are accompanied by the TM symbol are trademarks of Centurion Systems (Pty) Ltd, in South Africa and other territories; all rights are reserved. We invite you to contact us for further details.
Need help?
Do you have a question about the D10 SMART and is the answer not in the manual?
Questions and answers