Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Garmin 150
Summary of Contents for Garmin 150
- Page 1 100 and echo 150 owner’s manual...
- Page 2 All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
-
Page 3: Manual Conventions
• In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020. • In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000. • In Europe, go to www.garmin.com/support for in-country support. -
Page 4: Getting Started
1. From the Sonar screen, select MENU > Setup > System > Contrast. 2. Select or . 3. Select ENTER. Adjusting the Backlight 1. Press and quickly release 2. Repeat to cycle through the brightness settings. echo 100 and echo 150 Owner’s Manual... -
Page 5: Setting The Beeper
Using Quick Adjust After adjusting a setting and returning to the Sonar screen, you can quickly return to the setting options. After returning to the Sonar screen, select echo 100 and echo 150 Owner’s Manual or . Getting Started... -
Page 6: Sonar Screen
Using the echo 100 and echo 150 Using the echo 100 and echo 150 Sonar Screen The sonar screen shows a full-view graph of sonar readings from a transducer. The depth scale indicated on the right of the screen shows ➊... -
Page 7: Adjusting The Zoom On The Sonar Screen Automatically
3. Select to decrease the gain. echo 100 and echo 150 Owner’s Manual Setting the Gain to Auto 1. From the Sonar screen, select MENU > Gain. 2. Select an option: •... -
Page 8: Setting The Battery Voltage Alarm
Selecting a Frequency for the echo 150 When using a dual frequency transducer, you can select a frequency for the echo 150 Sonar screen when using a dual frequency transducer. NOTE: The echo 100 operates only at 200 kHz. You can show data from a 200 kHz sonar signal or data from a 77 kHz sonar signal. -
Page 9: Specifications
From 5°F to 158°F (from -15°C to 70°C) Compass Safe 10 in. (250 mm) Distance Frequency echo 100: 200 kHz echo 150: 77 kHz or 200 kHz Power Source Voltage 10–20 Vdc Range Fuse AGC/3AG - 3.0 A Freshwater Depth echo 100: 600 ft. -
Page 10: Software License Agreement
Appendix Software License Agreement BY USING THE ECHO 100 OR ECHO 150, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the... - Page 12 © 2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Jangshu 2 Road, Sijhih, Taipei County, Taiwan www.garmin.com...
Need help?
Do you have a question about the 150 and is the answer not in the manual?
Questions and answers