Sennheiser BW900 Set-Up And Instructions For Use
Sennheiser BW900 Set-Up And Instructions For Use

Sennheiser BW900 Set-Up And Instructions For Use

Wireless microphone with zoom switch analog

Advertisement

Sennheiser BW900 Wireless Microphone with Zoom Switch Analog
This unique microphone is designed for use with a telephone, but can also be connected to a PC via
several mechanisms. Connecting the BW900 to a Bluetooth connection is discussed elsewhere. These
instructions describe how to connect your BW900 to a pc using a reliable wired connection with an
Analog Zoom Wwitch and it's included modular to twin 3.5 mm cable.

Preliminary Set-Up:

your PC and your telephone. Depending upon whether you have an office telephone with a modular
"headset" jack, or a regular corded telephone, use the set-up described below, using the included
modular telephone cords.
Figure 1: Set up with standard corded telephone
Typical Set-up in which BW900 is used both PC
and telephone. Analog Zoom Switch is used to
toggle back and forth between PC and
telephone. Although the USB adapter is
optional, it is highly recommended.
Set-Up and Instructions for Use
First, you must make the basic connection of the BW900, Zoom Switch Analog,
Figure 2: Set-up with Phone with Headset Jack
Set-up in which BW900 is used with PC and
telephone having a modular headset jack. Switch
is used to toggle back and forth between PC and
telephone

Advertisement

Table of Contents
loading

Summary of Contents for Sennheiser BW900

  • Page 1 Connecting the BW900 to a Bluetooth connection is discussed elsewhere. These instructions describe how to connect your BW900 to a pc using a reliable wired connection with an Analog Zoom Wwitch and it’s included modular to twin 3.5 mm cable.
  • Page 2 Switch Analog is attached to the modular “headset” jack on the telephone. 2. The short modular cable included with the BW900 attaches to the plug labeled “phone” on the base of the BW900 and the other end is attached to the plug on the left side of the Zoom Switch Analog.
  • Page 3 c. Start Dragon NaturallySpeaking and create a new user (NaturallySpeaking > Manage > New Users d. Select bluetooth microphone as the dictation source e. In the next step, choose your sound system (either your USB sound adapter or the built in sound card on your PC. Continue training for a new user, following all instructions and reading appropriate training text...
  • Page 4 ¾ inch from the side of your mouth 4. Be sure the button on the front left of the BW900 base is in the down position (put it in the up position only when you want to lift your telephone headset and use the headset rather than BW900 to make a phone call) 5.

Table of Contents