Table of Contents
Advertisement
CD-BP1450V
(Continued)
Connecting the AC power lead
Check the setting of the AC voltage selector located on the
rear panel before plugging the unit into an AC socket. If nec-
essary, adjust the selector to correspond to the AC power
voltage used in your area.
Selector adjustment:
Turn the selector with a screwdriver until the appropriate
voltage number appears in the window (110 V, 127 V, 220 V
or 230 V -240 V AC).
Notes:
Plug the AC power lead into an AC socket, after any con-
nections.
Unplug the AC power lead from the AC socket if the unit
will not be in use for a prolonged period of time.
Never use a power lead other than the one supplied. Use
of a power lead other than the one supplied may cause
an electric shock or fire.
AC Plug Adaptor
In areas (or countries) where an AC socket as shown in
illustration
is used, connect the unit using the AC plug
adaptor supplied with the unit, as illustrated. The AC plug
adaptor is not included in areas where the AC wall socket
and AC power plug can be directly connected (see illustra-
tion
).
Note for users in Australia and New Zealand:
An AC plug adaptor is not supplied if the lead has an Austra-
lian Standard plug.
All manuals and user guides at all-guides.com
OPERATION MANUAL
The International Telecommunication Union (ITU) has
established that member countries should maintain either a
10 kHz or a 9 kHz interval between broadcasting frequen-
cies of any AM station. The illustration shows the 9 kHz
interval zones (regions 1 and 3), and the 10 kHz interval
zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on
the rear panel) to AM tuning interval (span) of your area.
1
2
To change the tuning zone:
1
To an AC socket
2
3
"CLEAR AL" will appear.
Caution:
The operation explained above will erase all data stored
in memory including clock and timer settings, and tuner
and CD presets.
– 6 –
AM/FM interval (span)
Press the ON/STAND-BY button to enter the stand-
by mode.
Set the SPAN SELECTOR switch to "50/9" for 9 kHz
AM interval (50 kHz FM interval), and "100/10" for 10
kHz AM interval (100 kHz FM interval).
Whilst pressing down the
EQUALIZER/X-BASS/DEMO button, hold down the
ON/STAND-BY button for at least 1 second.
/
button and the
Advertisement
Table of Contents
