Opel Agila Manual page 92

7.6.5 MIL/telltale engine electro-
nics illumination overview
On
OBD I, critical (eg. Vehicle Speed)
OBD II, w/o Missfire (O2 esnsor's)
Missfire
N/A Off
3rd On
1st Flashing
MIL ON
The MIL will illuminate if any emis-
sion fault is clearly detected and
stored.
If misfire is detected the MIL will be
flashing with the frequency of 1 Hz.
MIL OFF
The MIL can be switched OFF after
two or three driving cycles. (Value
can be calibrated)
92
7.6.6 Deletion of DTC
A DTC can be deleted if 40 failure-
free warm-up cycles have passed,
On
and the DTC was no longer de-
On
tected. A DTC can also be cleared
Off
using a delete command from a
generic scan tool. The procedure for
the Freeze Frame is identical.