Related Manuals for Fujitsu LQFP-64P
Summary of Contents for Fujitsu LQFP-64P
- Page 1 FUJITSU SEMICONDUCTOR SS01-71060-1E SUPPORT SYSTEM DSU-FR EMULATOR LQFP-64P HEADER TYPE 2 MB2198-304 OPERATION MANUAL...
- Page 2 MB91460 series Fujitsu FR* This manual describes how to use the LQFP-64P header type 2 for the DSU-FR emulator. Please read the manual carefully before using. Please contact your Fujitsu sales or support representative for de- tails on which production and evaluation MCU models can be used with this product.
- Page 3 (i.e., submersible repeater and artificial satellite). Please note that FUJITSU will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.
-
Page 4: Handling Precautions
This product is used as an emulator system by combining with an optional emulator, DSU cable and adapter. Consult a sales or support representative from Fujitsu Limited for details on the adapter and emulator for this product. 2. Handling Precautions ■... - Page 5 3. Notes on Designing ■ Notes on designing the printed circuit board for the user system If the header board is connected to a user system, the heights of parts mounted around the header board are restricted. When designing the printed circuit board of the user system, consider the heights of components within the range of the header board, as shown in Figure 1, so that the components mounted on the user system do not interfere with the header board.
- Page 6 ■ MCU footprint design notes Figure 2 shows the recommended dimensions of the NQPACK footprint mounted on the printed cir- cuit board of the user system. The printed circuit board of the user system must be designed with due consideration given to this footprint as well as to the mass production MCU.
- Page 7 4. Procedure for Connecting to the User System Before using the MB2198-304, mount the supplied NQPACK on the user system. Connect the header board directly to the adapter. Refer to the operation manual of the adapter for details on how to connect the adapter. ■...
- Page 8 Header board User system ■ Disconnection To disconnect the header board from the user system, remove all four screws, and then pull the header board straight out of the NQPACK. YQPACK Figure 4 Header board connection Screws for securing the header board Washer NQPACK...
- Page 9 5. Mounting Mass Production MCUs Use the supplied HQPACK to mount a mass production MCU on the user system. ■ Mounting 1. To mount a mass production MCU on the user system, align the index mark (▲) on the NQPACK mounted on the user system with the index mark (●) on the mass production MCU.
-
Page 10: Connector Pin Assignment
6. Connector Pin Assignment The signals from the evaluation MCU mounted on the adapter board are connected to the YQPACK (the same assignments as mass production MCU) via adapter I/F connectors 1 and 2 on the header board. For details on the mass production MCU pins, refer to the data sheet or hardware manual of each MCU. - Page 11 Connector Mass Production Pin No. MCU Pin No. Table 1 Adapter I/F Connector 1 (Row A) Evaluation MCU Connector Pin No. Pin No. A100 Mass Production Evaluation MCU MCU Pin No. Pin No. AC38 AB36 AC36 AC35 AF38 AD36 AE36 AG38...
- Page 12 Table 2 Adapter I/F Connector 1 (Row B) Connector Mass Production Pin No. MCU Pin No. Evaluation MCU Connector Pin No. Pin No. B100 Mass Production Evaluation MCU MCU Pin No. Pin No. AD38 AA37 AB37 AD35 AE38 AC37 AD37 AE37...
- Page 13 Connector Mass Production Pin No. MCU Pin No. Table 3 Adapter I/F Connector 2 (Row A) Evaluation MCU Connector Pin No. Pin No. A100 Mass Production Evaluation MCU MCU Pin No. Pin No. AF37 AF36 AG36 AG37 AK38 AH36 AJ36 AL38 AB38...
- Page 14 Table 4 Adapter I/F Connector 2 (Row B) Connector Mass Production Pin No. MCU Pin No. Evaluation MCU Connector Pin No. Pin No. B100 Mass Production Evaluation MCU MCU Pin No. Pin No. AH38 AF35 AG35 AH37 AJ38 AH35 AJ35 AJ37 AA36 AB35...
- Page 15 SS01-71060-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM DSU-FR EMULATOR LQFP-64P HEADER TYPE 2 MB2198-304 OPERATION MANUAL February 2007 the first edition Published FUJITSU LIMITED Electronic Devices Edited Business Promotion Dept.