Table of Contents
Advertisement
6. Using Options
You can make various option settings such as alerts and LED lighting,
and check the number of accounts registered with an air conditioner.
Home restricted mode : Only "Home leave mode", "Cooling specific",
Demo mode
You can switch to remote operation mode using "Changing Application
Settings" in the main menu.
→ To
"Changing Application Settings"
Figure 6-1
and "LED ON" are operable.
: Options are not operable.
Tap [Options] on the lower part of the
air conditioner details screen.
The "Options" screen appears.
- 21 -
54
-
-
'21 • SRK-T-324
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the WF-RAC and is the answer not in the manual?
Questions and answers
My WF-RAC can not establish a stable link to my wireless router. I have 4 devices and have the issue with one of them. The signal strength is perfect, so it is not a problem. The device connects for about 15-30 seconds and disconnects from my wifi router. After that it connects again, etc...
The Mitsubishi Heavy Industries WF-RAC may keep disconnecting from the wireless router despite good signal strength due to several possible reasons:
1. Interference from Other Devices – The device may experience interference from other electronic devices emitting radio waves, such as microwave ovens.
2. Barriers Affecting Signal Stability – Even if the signal strength appears good, barriers like metal or reinforced concrete between the WF-RAC and the router can cause instability.
3. Incompatibility with Mobile Wi-Fi Routers – The WF-RAC requires a wireless LAN router compatible with IEEE 802.11b/g/n (2.4 GHz band). Operation with a mobile Wi-Fi router is not guaranteed.
4. Network Configuration Issues – The product must be connected to the Internet via a router and cannot connect directly to telecommunication carrier lines.
5. Environmental Conditions – The WF-RAC operates within a temperature range of 0-40°C and humidity of 75% or less. Exceeding these conditions may cause disconnections.
Checking these factors and adjusting the environment or network setup may help resolve the issue.
This answer is automatically generated