Page 31
Content 1 Welcome 1.1 Product features 2 Important Notice 2.1 Safety 3 Your Smart Voice Recorder What’s in the box Overview 3.1 Power on/off 3.2 Recording 3.3 Playback...
Page 32
3.4 Settings mode 3.5 Status indication 3.6 Connect to the computer 3.7 Download and install APP 3.8 Connection 4 APP Operating Instruction 4.1 Recording with APP/Real-time translation 4.2 File 4.3 Settings 4.4 Sync file operation 4.5 My 5 Specifications...
1 Welcome Welcome to the world of Philips! We are honoured by your choice and purchase of Philips' products. You can have Philips’ comprehensive technical supports from our website, e.g. user’s manuals, software downloading and warranty information etc. www.philips.com 1.1 Product features •...
2 Important Notice 2.1 Safety • To avoid short circuits, DO NOT expose the product to humidity. • DO NOT place the product near a location with heat source or direct sunlight. • Be careful not to pinch the cable, especially the plug.
Page 36
We specially recommend that users make additional copies of the files in the device. • Images are for reference only. Philips reserves the right to change the color / appearance / design / parameters/product functions. Hardware,...
3.1 Power on/off (1)Power on: Long press “ ” for 2~3 seconds to switch the device on, and “PHILIPS” will be displayed. (Share at power-on function is enabled automatically, and the Share icon begins to flash, the function will be...
(2)Power off: In the state of power-on, long press “ ” for 2~3 seconds to power off after “PHILIPS” is displayed. 3.2 Recording If it is the first time you use this Recorder, please notice the recording instructions in this section: for your convenience, please set the Rec scene, Rec quality and Storage folder before recording;...
Page 41
confirm. • Each folder can store 99 recording files, a total of 396 files. When a recording folder is full, the system will automatically store the subsequent recording files into the next folder. If all four folders are full, the recording will prompt that there is no room for another recording file.
Page 42
Folder Progress bar Current recording time Current duration Battery Recording status File name Record scene Recording pause...
② Recording with APP: After connected via the APP, select the corre- sponding recording scene in the main interface to record. During recording, tap Pause to pause recording, and tap again to resume recording, tap Stop to save the recording. 3.3 Playback Play via device: In the Voice interface, press “...
Page 44
Folder Progress bar Current recording time Total recording time Battery Recording status File name Record scene Playback Return...
Page 45
3.3.1 Music Play In the main menu interface, swipe left and right on the touch area to switch to Music menu, and press “ ” to enter the music play interface. Music files need to be copied to the music folder to playback. 3.3.2 Volume Control In the playback/stop state, the Volume Control interface will pop up by swiping up and down on the touch area and the volume can be adjusted by...
Page 46
by swiping up and down on the touch area, and confirmed by pressing Play. 3.3.4 Delete files In the stop/pause interface, the delete menu interface will pop up after long pressing Play for 2-3 seconds. A single file or all files can be deleted by swiping up and down on the touch area, and deleted by pressing “...
3.4 Settings mode Settings mode includes Rec scene, Rec quality, Blacklight, Auto off, NC record , Device ID, Memory, Version, Format, System time, Timer record, Language, Recording light, Factory settings, Memory info, etc. 3.5 Status indication ① Bluetooth search and pairing: Share icon flashes; ②...
⑤ Charging: The indicator is on while charging and off when fully charged. 3.6 Connect to the computer The Recorder can be used as a storage device. When the files are moved in/out, please do not disconnect from the computer to avoid damaging the files.
Page 49
Note 1. If failed to connect, please check whether the Bluetooth is turned on; 2. Turn the recorder off, then turn it on again; 3. Close the APP and reopen it to connect.
3.8 Connection Connect with an Android phone: Step 1: Long press “ ” to power on, the device automatically enters into Bluetooth search status, and the Share icon begins to flash. Step 2: Turn on the Bluetooth, and open the installed APP; Step 3: After clicking Search, the device ID number will pop up, e.g.
Page 51
Step 2: If open the APP directly, you will be prompted with “Mobile phone’s Bluetooth not turned on”, turn Bluetooth on in Settings, or via shortcut; if Bluetooth is turned on, when you open the APP you will be prompted with “Device not found, please tap Search”;...
Page 52
Note • During the connection, if the ID number cannot be found, please confirm whether the Bluetooth of the device and the mobile phone be turned on, then click search again; if the ID number is found but cannot make connection, please close the APP and reopen the search to connect.
4 APP Operating Instruction 4.1 Recording with APP/Real-time translation After the Recorder is connected to the APP, the APP interface displays “Device connection success”, then the recording works by operating the recorder through the APP. In the APP, select the recording scene in the Real-time translation interface, and then the APP will record, so as the Recorder.
Page 54
of real-time translation, make sure the device is within 5 meters of the mobile phone, and no obstacles between them; 2 During recording, do not turn off the device or close the APP. Save the recording file first to avoid file corruption; 3 When recording with the APP, if the effective distance is exceeded, the APP will be disconnected.
Page 55
is used, you will be prompted that the microphone is in use. You need to turn off Bluetooth of the mobile phone, or disconnect for normal use. Note • When the mobile phone has no network or has poor network, it will prompt “The network is not available, please check the network”.
Note 1. During real-time translation, focus the sound source on the micro- phone, and do not cover the Mic head with your hand, so as to avoid to affect the recognition effect; 2. During real-time translation, do not exceed the effective recognition distance;...
Page 57
Real-time translation list: Recording files that saved on mobile phone after recording with APP. Sync device:The ABCD folder will pop up when the Sync device is selected. After selecting the folder, the files that sync with the Recorder can be re- freshed by pulling down the screen.
Note • At present, voice distinguishment only supports Chinese, not other languages; • When using voice distinguishment, please make sure that the file is clear. Messy and noisy files will affect the effect. 4.3 Settings In the recording interface, tap "Settings" in the upper right, to set Record- ing scene, Indicator, Playback mode, Backlight, Time calibration, Capacity (remaining/total), APP interface introduction, Check for updates, About, Disconnect the device, etc.
Reminder • If you need to disconnect with the APP, just select “Disconnect the device” in the Settings to disconnect. To avoid exceptions, you cannot close the APP directly. 4.4 Sync file operation (1)In the APP interface, select the “Sync with device” to enter the list interface.
Page 60
All,etc.” will pop up after long pressing the file. Select Cancel to exit the current interface. Select Rename to change the name of the current file. Select Share to share the current file. After you select “Delete”, “Delete mobile phone file” or “Delete Voice Recorder file”...
Page 61
Reminder • The sync file refers to the file recorded by the recorder independently, which can be synchronized to the mobile phone for text transcription and translation after connecting with the APP. • The files with the “opus” suffix cannot be deleted, otherwise they cannot be synchronized.
Page 62
4.5 My Select “My” to enter the Setting interface, including: Play mode, , Indicator, Backlight, Time calibration, Capacity (remaining/total), APP interface intro- duction, Check for updates, About, Disconnect the device, etc.