Looking Up Fru Information; Removing Hardware; External Options; Top Cover - Lenovo ThinkSmart Core Hardware Maintenance Manual

Skype board
1
LED cable connector
3
Video capture card slot
5
HDMI-in connector
7 8
System fan cable connector
10
USB-A connector

Looking up FRU information

For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to:
https://support.lenovo.com/partslookup

Removing hardware

This section provides instructions on how to remove and install hardware for ThinkSmart Core. You can
expand the capabilities of your product and maintain your product by removing or installing hardware.
To remove and install the ThinkSmart Bar, ThinkSmart Bar XL, and ThinkSmart Cam, refer to the Quick Start
Guide.
Attention: Do not open your product or attempt any repair before reading and understanding the Chapter 1
"Important safety information" on page 1.

External options

You can connect external options to the ThinkSmart Core. For some external options, you must install
additional software in addition to making the physical connection. When installing an external option, see
"ThinkSmart Core connector overview" on page 17 to identify the required connector. Then, use the
instructions that come with the option to help you make the connection and install any required software or
device drivers.

Top cover

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
44
ThinkSmart Core Kit Hardware Maintenance Manual
2
Board-to-board connector
4
Power button
6
Thermal sensor connector
9
HDMI-out connector
11
USB-C connector