Samsung DVE54M8750 Series User Manual

Samsung DVE54M8750 Series User Manual

Hide thumbs Also See for DVE54M8750 Series:

Advertisement

Quick Links

Dryer
User manual
DVE(G)54M8750*
DV8750M-03784A-00_EN.indd 1
2016-12-28
2:23:40

Advertisement

Table of Contents
loading

Summary of Contents for Samsung DVE54M8750 Series

  • Page 1 Dryer User manual DVE(G)54M8750* DV8750M-03784A-00_EN.indd 1 2016-12-28 2:23:40...
  • Page 2: Table Of Contents

    Step-by-step installation Vent blockage test Exhaust ducting guide Switching the door position Before you start Sort and load Functional prerequisite Operations Feature panel Simple steps to start Cycle overview Drying guide Special features Samsung Smart Home English DV8750M-03784A-00_EN.indd 2 2016-12-28 2:23:40...
  • Page 3 Maintenance Vent sensor Cleaning Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet Cycle chart English 3 DV8750M-03784A-00_EN.indd 3 2016-12-28 2:23:40...
  • Page 4: Safety Information

    Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features.
  • Page 5: Important Safety Precautions

    WARNING - Gas Appliances: • State of California Proposition 65 Warning (US only) This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. • Gas appliances can cause low-level exposure to Proposition 65 listed substances, including but not limited to, benzene, carbon monoxide, formaldehyde and soot, substances resulting from the incomplete combustion of natural gas or LP fuels.
  • Page 6 Safety information 5. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 6. Before the appliance is removed from service or discarded, remove the door to the drying compartment.
  • Page 7: Warnings

    WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. Any material that has been in contact with a cleaning solvent or flammable liquids or solids should not be placed in the dryer until all traces of these flammable liquids or solids and their fumes have been removed.
  • Page 8: Cautions

    Safety information Cautions CAUTION • Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is necessary when the appliance is used near children and pets. • Before discarding or removing your dryer from service, remove the door to the drying compartment to prevent children or animals from becoming trapped inside.
  • Page 9 • Residual oil on clothing can ignite spontaneoulsy. The potential for spontaneous combustion increases when items containing vegetable oil or cooking oil are exposed to heat. Heat sources such as your dryer can warm these items, allowing an oxidation reaction in the oil to occur. Oxidation creates heat. If this heat cannot escape, the items can become hot enough to catch fire.
  • Page 10: Installation Requirements

    Installation requirements Read through the following instructions before installing the dryer, and keep this manual for future reference. WARNING The control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel - Do not contact these parts while the appliance is energized.
  • Page 11: Ducting Requirements

    Ducting requirements Recommended Use only for short-run installation Weather hood type 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° Metallic Metallic Rigid Rigid elbows flexible* flexible* 80 ft. (24.4 m) 41 ft. (12.4 m) 74 ft. (22.6 m) 33 ft. (10.1 m) 68 ft.
  • Page 12: Exhausting Requirements

    Installation requirements Exhausting requirements Outside the United States and Canada The dryer must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl • Refer to the local codes. space, or a concealed space of a building. WARNING Exhausting the dryer to the outside will •...
  • Page 13: Gas Requirements

    Gas requirements WARNING • Do not reuse old flexible metal gas lines. Flexible gas lines must be • Use only natural or LP (liquid propane) design certified by the American Gas gases. Association (CGA in Canada). • THE INSTALLATION MUST CONFORM WITH LOCAL CODES, OR IN THE NOTE ABSENCE OF LOCAL CODES, WITH...
  • Page 14: Electrical Requirements

    Installation requirements Electrical requirements Grounding The wiring diagram is located on the plate under the control panel or rear frame. This dryer must be grounded. In the event of a malfunction or breakdown, the ground WARNING will reduce the risk of electrical shock by •...
  • Page 15 • If a power cord is not used and the WARNING electric dryer is to be permanently Risk of Electric Shock wired, the dryer must be connected to When local codes allow, you can connect a permanently grounded metal wiring the dryer’s electrical supply with a new system, or an equipment grounding power supply cord kit, marked for use with...
  • Page 16: Installation

    What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the accessories, contact a local Samsung service center or the retailer. Dryer at a glance 01 Control panel...
  • Page 17 Accessories & tools Provided accessories Y connector Water hose Short water hose (Canadian models only) Required tools Pliers Cutting knife Pipe wrench Nut screwdriver (gas models only) Level Philips screwdriver Duct tape Wrench WARNING Packing materials can be dangerous to children. Keep all packing materials (plastic bags, polystyrene, etc.) out of children’s reach.
  • Page 18: Step-By-Step Installation

    Installation Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Install the exhaust system 1. Select a location and move the dryer to the site. For easy access, we recommend you install the dryer in the same location as your washer.
  • Page 19 STEP 3 Connect the electrical wiring First, read through the “Electrical requirements” section, and then follow these steps. 3-wire system 1. Loosen or remove the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block.
  • Page 20 Installation 4-wire system 1. Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
  • Page 21 STEP 4 Connect the water hose (applicable models only) The dryer must be connected to a cold water tap using the provided water hoses. 1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose.
  • Page 22 Installation Using the short hose as an extension 1. Close the cold water tap. If you have a washer cold water hose attached to the cold water faucet, unscrew and remove the hose. Then, connect the short hose (B) to the cold water tap. Turn the coupling manually until it is tight.
  • Page 23 STEP 5 Level the dryer To ensure optimal performance, the dryer must be level. 1. Using a level (A), check if the dryer is level side to side and then front to back. If the dryer is not level, adjust the leveling feet (B) at the bottom of the dryer.
  • Page 24: Vent Blockage Test

    Installation STEP 6 Power on (Gas models) Make sure all gas connections, the exhaust line, and all wiring is connected correctly. Then, plug the power cord into a power source and check the dryer’s installation and operation using the final checklist in Step 7 below. STEP 7 Final check When installation is complete, confirm that: •...
  • Page 25 3. The Vent Blockage Test starts immediately after pressing the START/PAUSE button. During the test, the number indicator makes a circle in 6 steps clockwise. The test takes about 2 minutes. Do not open the door during the test. 4. After 2 minutes, if the test has completed, the result is displayed and a tone is given. If status of the duct system is normal, “0”...
  • Page 26: Exhaust Ducting Guide

    Installation Exhaust ducting guide Ducting 1. Make sure the dryer is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the dryer connection. Never use lint-trapping screws. 3. To facilitate the exhaust, keep the ducts as straight as possible. Cleaning Clean all old ducts before installing the dryer, and make sure the vent flap opens and closes freely.
  • Page 27 3. Remove the two screws from the lever holder, and then remove the holder cover. 4. Put the lever holder on the other side as shown, and then tighten the screws. Install the holder cover on the opposite side as shown. 5.
  • Page 28 Installation 7. Remove the glass holder, and switch the positions of: a. the hinge cover and the door handle. b. the hinge holder and the glass-guide holder 8. Remove the door lever, and then move it to the other side as shown. 9.
  • Page 29: Before You Start

    Before you start Here are a few things you should know before starting your dryer. Sort and load • Put one wash load in the dryer at a • Overloading reduces the tumbling time. action, resulting in uneven drying and •...
  • Page 30: Operations

    Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the “Safety information“ before operating this appliance. Feature panel Press to select a desired cycle in the left-most panel. When a cycle is selected, the cycle indicator lights up. •...
  • Page 31 Press Dry Level to select a dry level from the options available. The corresponding indicator turns on. • Larger or bulkier loads may require Very Dry or More Dry for complete dryness. • Less Dry is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
  • Page 32 After connecting the upper dryer to your home network using the 12 Smart Control Samsung Smart Home app, you can control the dryer remotely. (Elec.) / When started, the Smart Control indicator blinks and the top Smart Monitor door locks.
  • Page 33: Simple Steps To Start

    Simple steps to start 1. Press POWER to turn on the dryer. 2. Press to select a cycle in the left-most panel. 3. Change the cycle settings (Dry Level, Temp. and Time) as necessary. 4. Optionally, you can activate options available by pressing the relevant button (Anti Static, Mixed Load Bell, Wrinkle Prevent, and/or Eco Dry).
  • Page 34: Cycle Overview

    Operations Cycle overview Sensor Dry Cycle Description For most fabrics including cottons and linens. NORMAL If NORMAL is selected, the Eco Dry function is enabled by default. For more information, see Eco Dry in the “Feature panel“ section. For drying items made out of heavy fabrics, such as jeans, HEAVY DUTY corduroys, or work clothes, with high temperature heat.
  • Page 35 Manual Dry Cycle Description You can specify a cycle time in minutes. TIME DRY If TIME DRY is selected, the Eco Dry function is enabled by default. For more information, see Eco Dry in the “Feature panel“ section. QUICK DRY A quick drying cycle running for 30 minutes AIR FLUFF Tumbles the load in room temperature air.
  • Page 36: Drying Guide

    Operations Drying guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Cycle Description Follow the care label instructions or dry using BEDDING. Bedspreads &...
  • Page 37: Special Features

    Special features Sound On/Off Child Lock To turn off the dryer’s notification beeps Child Lock prevents children from and melodies, press and hold Anti Static playing with the dryer. When Child Lock for 3 seconds. is activated, all buttons except for the POWER button are disabled.
  • Page 38 To use Smart Care, you must have the • If you hold the smartphone at an angle Samsung Smart Care app installed on your to the dryer’s display, the smartphone smartphone. may not recognize the information NOTE code.
  • Page 39: Samsung Smart Home

    Electronics to your smart device. NOTE • The Samsung Smart Home app is designed for Android 4.0 (ICS) or higher, or iOS 8.0 or higher, and is optimized for Samsung smartphones (Galaxy S and Galaxy Note series). • On other devices, some functions may operate differently.
  • Page 40 Operations Getting started With Samsung Smart Home, you can remotely control your dryer from your smart device. For improved performance, the content and design of the app is subject to change without notice. 1. Launch the Samsung Smart Home App on your smartphone.
  • Page 41: Maintenance

    Maintenance Keep the dryer clean to prevent decreased performance and to lengthen its life. WARNING The control board and inlet valve are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel - Do not contact these parts while the dryer is energized. Vent sensor The dryer features a vent sensor that detects and notifies you when it is time to clean the ductwork.
  • Page 42: Cleaning

    Maintenance Cleaning Feature panel Dryer exterior • Clean with a soft, damp cloth. Do not • Clean with a soft, damp cloth. Do not use abrasive substances. use abrasive substances. • Do not spray liquid cleaning agents • Protect the surface from sharp objects. directly on the display of the dryer.
  • Page 43: Troubleshooting

    Troubleshooting Checkpoints If the dryer operates abnormally, first check the list of problems in the table below and try the suggested actions. Problem Action • Make sure the door is latched shut. • Make sure the power cord is plugged into a live electrical outlet.
  • Page 44 Troubleshooting Problem Action • Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly. • It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle. Is noisy. •...
  • Page 45 Extended time. reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. English 45 DV8750M-03784A-00_EN.indd 45 2016-12-28 2:23:50...
  • Page 46: Information Codes

    • Check if the vent system is restricted. • If this information code remains, contact a Samsung service center. Incorrect door switch. • Contact a Samsung service center. If any information code keeps appearing on the screen, contact a Samsung service center. English DV8750M-03784A-00_EN.indd 46 2016-12-28 2:23:50...
  • Page 47: Specifications

    Specifications Fabric care chart Bleach The following symbols provide garment care direction. The clothing care labels Any bleach (when needed) include symbols for drying, bleaching, Only non-chlorine (color-safe) ironing, and dry cleaning. The use of bleach (when needed) symbols ensures consistency among garment manufacturers of domestic Tumble dry and imported items.
  • Page 48: Protecting The Environment

    Specifications Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do not dry-clean Line dry / Hang to dry Drip dry Warning symbols for laundering Dry flat Do not wash Do not wring Do not bleach Do not tumble dry No steam (added to iron) Do not iron Protecting the environment...
  • Page 49: Specification Sheet

    Specification sheet NOTE “A. Height” Spec can vary from 42.4 to 43.3 inches (107.7 - 108.9 cm) depending on the leveling feet adjustment. Type Front loading dryer Product - inches (cm) 42.4 (107.7) A. Height Required for Installation - inches 44.4 Product - inches (cm) 27.0 (68.6)
  • Page 50: Cycle Chart

    Specifications Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about ¾ full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about ½...
  • Page 51 NOTE • : factory setting, : can be selected Functions Temp. Control Cycle Time High Medium Med Low Extra Low NORMAL  HEAVY DUTY  PERM PRESS  BEDDING  DELICATES  REFRESH  WRINKLE AWAY   STEAM SANITIZE ...
  • Page 52 Regulatory notice FCC Notice CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: 1.
  • Page 53 IC Notice The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 54 The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM;...
  • Page 55 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
  • Page 56 God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
  • Page 57 Ridgefield Park, NJ 07660 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English 57 DV8750M-03784A-00_EN.indd 57 2016-12-28 2:23:55...
  • Page 58 If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
  • Page 59 God; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied or authorized by SAMSUNG that damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, maintenance and environmental instructions that are covered and prescribed in the instruction book;...
  • Page 60 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. Please contact your Samsung call agent for help with any of these issues. English DV8750M-03784A-00_EN.indd 60 2016-12-28 2:23:55...
  • Page 61 Especificaciones Tabla de ciclos NOTA Para obtener los mejores resultados, siga las recomendaciones sobre el tamaño de la carga para cada ciclo de secado. • Carga grande: Llene ¾ del tambor. No agregue prendas por encima de este nivel para que puedan dar vueltas con libertad.
  • Page 62 NOTA • : configurado de fábrica, : se puede seleccionar Funciones Control de temperatura Ciclo Time (Tiempo) Med Low (Media Extra Low (Extra High (Alta) Medium (Media) Low (Baja) baja) baja) NORMAL  HEAVY DUTY (ACCIÓN FUERTE)  PERM PRESS (PLANCHADO ...
  • Page 63 Aviso regulatorio Aviso para FCC PRECAUCIÓN Todos los cambios y modificaciones que no cuenten con la aprobación expresa de la parte responsable del cumplimiento invalidará la autoridad del usuario para operar el equipo. Este dispositivo cumple con el Apartado 15 de las Normas de la FCC. El funcionamiento se encuentra sujeto a las siguientes dos condiciones: 1.
  • Page 64 Aviso IC El término “IC” antes del número de certificación de radio significa únicamente que se han cumplido las especificaciones técnicas del Ministerio de Industria del Canadá. El funcionamiento se encuentra sujeto a las siguientes dos condiciones: 1. Este aparato no puede causar interferencia, y 2.
  • Page 65 Asimismo es posible obtener el correspondiente código fuente completo en un soporte físico como un CD-ROM; se le cobrará una tasa mínima. La siguiente UR http://opensource.samsung.com/opensource/SimpleConnectTP/seq/0 lleva a la página de descarga del código fuente disponible y a la información de licencia de código abierto relacionada con este producto.
  • Page 66 El presente producto de la marca SAMSUNG, tal como lo provee y distribuye SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) y lo entrega como nuevo, en su caja de cartón original al comprador o consumidor original, está garantizado por SAMSUNG contra defectos de fabricación de los materiales y la mano de obra durante el período limitado de la garantía de:...
  • Page 67 CIRCUNSTANCIAS ESPECIALES, DAÑO IMPREVISTO O DERIVADO CAUSADO POR EL USO, USO INCORRECTO, O INCAPACIDAD PARA USAR EL PRESENTE PRODUCTO, INDEPENDIENTEMENTE DE LA TEORÍA LEGAL EN QUE SE FUNDE EL RECLAMO Y AUN CUANDO SE LE HAYA NOTIFICADO A SAMSUNG DE LA POSIBILIDAD DE TALES DAÑOS.
  • Page 68 Las visitas del personal de servicio técnico para explicar funciones, mantenimiento o instalación no están cubiertas por la garantía. Póngase en contacto con su agente del centro de llamadas Samsung para que le asesore. Español 57 DV8750M-03784A-00_MES.indd 57 2016-12-28...
  • Page 69 El presente producto de la marca SAMSUNG, tal como lo provee y distribuye SAMSUNG ELECTRONICS CANADA, INC. (SAMSUNG) y lo entrega como nuevo, en su caja de cartón original al comprador o consumidor original, está garantizado por SAMSUNG contra defectos de fabricación de los materiales y la mano de obra durante el período limitado de la garantía de:...
  • Page 70 CIRCUNSTANCIAS ESPECIALES, DAÑO IMPREVISTO O DERIVADO CAUSADO POR EL USO, USO INCORRECTO, O INCAPACIDAD PARA USAR EL PRESENTE PRODUCTO, INDEPENDIENTEMENTE DE LA TEORÍA LEGAL EN QUE SE FUNDE EL RECLAMO Y AUN CUANDO SE LE HAYA NOTIFICADO A SAMSUNG DE LA POSIBILIDAD DE TALES DAÑOS.
  • Page 71 (French) Las visitas del personal de servicio técnico para explicar funciones, mantenimiento o instalación no están cubiertas por la garantía. Póngase en contacto con su agente del centro de llamadas Samsung para que le asesore. Español DV8750M-03784A-00_MES.indd 60 2016-12-28...
  • Page 72 Notas DV8750M-03784A-00_MES.indd 61 2016-12-28 2:29:26...
  • Page 73 Notas DV8750M-03784A-00_MES.indd 62 2016-12-28 2:29:26...
  • Page 74 Notas DV8750M-03784A-00_MES.indd 63 2016-12-28 2:29:26...
  • Page 75 Scan this with your smartphone ¿PREGUNTAS O COMENTARIOS? PAÍS LLAME AL O VISÍTENOS EN LÍNEA EN 1-800-SAMSUNG (726-7864) U.S.A www.samsung.com/us/support 1-844-SAM-PAYS (726-7297) www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca_fr/support (French) DC68-03784A-00 DV8750M-03784A-00_MES.indd 64 2016-12-28 2:29:26...

Table of Contents