Download
Share
Print this page
EverFocus ED300 Series User's Manual And Operation Instructions
  1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. Security Camera
  5. ED300 Series
  6. User's manual and operation instructions

EverFocus ED300 Series User's Manual And Operation Instructions

Everfocus electronics corp. user's manual dome camera ed300 series
Hide thumbs Also See for ED300 Series:

Advertisement

Quick Links

Download this manual See also: User's Manual and Operating Instructions
ED300 Series
User' s Manual
and
Operation Instructions
Version 1.1

Advertisement

loading
Need help?

Need help?

Do you have a question about the ED300 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EverFocus ED300 Series

Summary of Contents for EverFocus ED300 Series

  • Page 1 ED300 Series User’ s Manual Operation Instructions Version 1.1...
  • Page 2 Notice This manual is presentED300 to the users of ED300 by EverFocus Electronics Corp. With years of engineering researches, EverFocus has sparED300 all efforts to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice.

  • Page 3: Table Of Contents

    Safety Warning...1 Introduction...3 Specification ...4 Major Parts Names and Functions ...5 Installation Instructions ...7 Lens Adjustments...8 Adjustments...9 Table of Contents...

  • Page 4: Safety Warning

    1. Do not expose the camera to humidity and dust. Moisture can damage the camera and cause the danger of electric shock. If the camera is mountED300 outdoors, a camera housing is requirED300. Do not install the camera at where there is greasy smoke or steam, where the humidity is too high, or where there is a lot of dust to prevent damages to the camera.
  • Page 5 5. Do not install the camera in the high temperature environment. InstallED300 the camera away from stoves, or other heat generating devices, or where it could be subject to direct sunlight as the high temperatures could cause deformation, discoloration or other damages of the camera.

  • Page 6: Introduction

    The High Resolution Dome Camera Series are compact, full functionED300 CCD Color Cameras. Their stylish appearance can be appliED300 as per installer's ideal locations on the ceiling. The dome camera designED300 with advancED300 digital processing curcuitry for high resolution 1/3" color interline transfer CCD sensor, it has DIP switch for AGC on/off, BLC on/off.

  • Page 7: Specification

    Pickup device: Video format: Scanning system: Picture elements: Effective picture elements: NTSC: 768 (H) x 494 (V); PAL: 752 (H) x 582 (V) Horizontal resolution: Sensitivity: S/N ratio: Varifocal lens: IRIS level: Back light comp.: Auto Gain Control: Auto white balance: Gamma correction: Monitor output pin: Video output:...

  • Page 8: Major Parts Names And Functions

    Major Parts Names and Functions 《ED300》 《ED300-A》...
  • Page 9 ? Camera Cover This cover will protect the camera from dust and damage. ? Lens This Vari-Focal Lens allows users to adjust the Zoom and Focus manually. Base The c amera unit is set in the dome base when it is shippED300 from the factory. ? Focus Ring To set the focus, loosen the Focus ring knob first, then turn the ring toward <∞>...

  • Page 10: Installation Instructions

    Installation Instructions 1. Remove the plastic dome cover. 2. Lossen the two screws of the supporting bracket to remove the camera body. 3. Using four screws to fix the camera base on the ceiling. 4. Put the camera body back to the supporting bracket, then tighten the two screws to fix the camera.

  • Page 11: Lens Adjustments

    Lens Adjustments Zoom and focus adjustments After the camera was installED300, the zoom and focus of the lens must be adjustED300. 1. Loosen the zoom ring knob, and then turn the ring towards <W> or <T> as necessary to obtain the desirED300 view range. W side (Zoom out) The viewing range will be wider and the subject is smaller.

  • Page 12: Adjustments

    Auto Gain Control Adjustment AGC ON: The sensitivity increases automatically when the light is low. AGC OFF: A low-noise picture is obtainED300 under a low light condition. Back Light Compensation Adjustment When the background of the subject is very bright and the subject itself is dark, set the BLC (Back Light Compensation) ON.
  • Page 13 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com Japan Office: 1809 WBG MARIBU East 18F, 2-6 Nakase.Mihama-ku.