Kenwood Remote Application - Kenwood KDC-BT660U Instruction Manual

KENWOOD Remote Application

You can control the KENWOOD car receiver from the following devices using
KENWOOD Remote application:
: iPhone/iPod touch (via Bluetooth or via USB input terminal)
or Android device (via Bluetooth)
: Android device (via Bluetooth)
: iPhone/iPod touch (via USB input terminal)
• For more information, visit <https://www.kenwood.com/cs/ce/>.
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting.
Start using KENWOOD Remote application
1 Start up the KENWOOD Remote application on your device.
2
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 15)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 10)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 15)
(Make sure the USB input terminal is not connected to any device.)
3 Select the device to use from the [FUNCTION] menu.
See the following "Settings to use KENWOOD Remote application".
: By default, [ANDROID] is selected. To use iPhone/iPod
touch, select [YES] for [IOS].
• / : "R.APP" indicator lights up when KENWOOD
Remote application is connected.
Settings to use KENWOOD Remote application
(For /
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4
Press and hold to exit.
To return to the previous setting item, press
[REMOTE APP]
[SELECT]
(For
Selects the device ([IOS] or [ANDROID]) to use the application.
[IOS] [YES]: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ; [NO]: Cancels.
If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/
iPod touch is connected via USB input terminal) to activate the application.
• The connectivity of the application will be interrupted or disconnected if:
– You change from iPod BT source to any playback source connected via
the USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID]
[YES]: Selects Android device to use the application via Bluetooth. ;
[NO]: Cancels.
[ANDROID LIST] Selects the Android device to use from the list.
•
[YES].
)
.
)
: Displayed only when [ANDROID] of [SELECT] is set to
ENGLISH
Default: [XX]
13