Optional Accessories - Makita DFJ212A Instruction Manual

Cleaning the fan unit
Wipe off dirt, dust, oil, grease .etc, with clean dry cloth.
To clean the fan blade, remove the ring and unhook
the housing from the cover using slotted screwdriver or
similar. There are three hooks on the housing. Unhook
them little by little in rotation so as not to break the
hooks.
► Fig.31: 1. Slotted screwdriver 2. Housing 3. Cover
4. Hole 5. Fan blade 6. Hook
NOTICE:
Do not remove the fan blade from the
housing.
NOTICE:
Do not wash the fan unit with water.
Be sure to attach the cover after cleaning the fan blade.
Place the cover onto the housing as shown in the figure
(note the direction of the logo on the cover and the loop
on the housing). Align the hooks with the holes and then
snap it on.
► Fig.32: 1. Logo on the cover 2. Loop on the housing
Cleaning the jacket/vest
• Detach the fan unit(s) and battery or battery holder
from the jacket/vest before washing.
• Follow the instructions on the tag.
• Cotton products may shrink when washed.
• Do not wash the jacket/vest with other clothes.
Doing so may cause color fading or color transfer.
• Use a laundry net when using a washing machine.
• Do not use the fabric softener.
• Use only neutral detergent.
• After washing, take out the jacket/vest from wash-
ing machine at once.
• Be sure to close the zip fastener before washing.
For the jacket with light reflector
• The performance of light reflector parts may be
weakened by washing.
• Machine wash in gentle cycle (The number of
times for washing is up to 5 times.)
• The number of times for washing is not the only
the factor to decide the lifetime of the jacket.
• The life of the jacket changes by how to use, how
to care and store state.
• If the light reflector parts or clothes have been
deteriorated, replace to a new jacket.
NOTE: The features of the jacket/vest vary depending
on the model. Refer to the section for the specifica-
tions for the features of your jacket/vest.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Filter set
• Battery BL1055B
• Battery holder
• Adapter cable for fan jacket/vest
• Adapter cable for heated jacket/vest/blanket
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
16 ENGLISH