Precautions For Use; About Software - JVC KV-DR305W Instruction Manual

Table of Contents

work correctly. Refer to "How to Install" for the loosening of

ﬁxing knob, installation orientation, installation angle, and

other information and then install the device correctly.

Do not install the device near a digital terrestrial television

antenna or an electrical component. Doing so may reduce

television receiver sensitivity or cause ﬂickering and noise.

Use a commercially available cleaning cloth or the like to wipe

oﬀ all dirt and grease on the mounting surface and then ﬁx

the mount base in place. If the device is re-aﬃxed or mounted

using, for example, general-purpose double-sided tape, the

adhesion strength may weaken and cause the device to fall.

After mounting the device, leave it for 24 hours before use to

enable the mounting strength of the mount bracket to

improve. Failing to do so may result in the adhesion of the

mount bracket becoming weak and the device falling.

Fix the cord in place with tape or the like so that it does not

interfere with driving.

Precautions for Use

Do not block the camera lens, get dirt on it, or place a

reﬂective object near it.

When LED traﬃc lights are recorded, video in which they

appear to be ﬂickering or ﬂashing may be recorded.

JVCKENWOOD assumes no responsibility with regard to the

distinguishing or recording of traﬃc lights.

If coating is used on the windshield of the vehicle, recording

quality may be aﬀected.

There is no guarantee that the device can record video in all

conditions.

Others

This device includes the software owned by following third parties.

Following condition of the license is applicable to each software.

Konatu Font

Applicable license :M IT License

libupnp

Applicable license :B SD 3-Clause "New" or "Revised" License

Table of Contents