Getting Started - Alcatel 2057 Series User Manual

• Change the input method

1.2 Getting started

1.2.1 Set up
Inserting or removing the SIM/microSD card
Place the SIM card with the chip facing downwards and slide it into
its housing. Make sure that it is correctly inserted. To remove the card,
press it and slide it out.
Power off your phone before inserting or removing the SIM/microSD
card.
2057X
Charging the battery
Connect the battery charger to your phone and plug into the socket.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the
charger.
• The mains socket must be near to the phone and easily accessible
(avoid electric extension cables).
2057D
21
To reduce power consumption and energy waste, disconnect
your charger when the battery is fully charged; switch off
Bluetooth. In Settings you can also lower the brightness of the
screen, and shorten the length of time before the screen goes
to sleep.
1.2.2 Power on your phone
To turn your phone on, hold down the End key until the phone
powers on. It will take a few seconds before the screen lights up. If
you've set up a screen lock in Settings, you will need to unlock your
phone using a password before the Home screen appears.
Even if no SIM card is installed, your phone will still power on and you
will be able to use some of the phone's features.
1.2.3 Power off your phone
To turn your phone off, hold down the End key.
22