Download Print this page

SuperCloset SuperPonics 8 Manual

Hydroponics system
Hide thumbs Also See for SuperPonics 8:

Advertisement

Quick Links

BY

Advertisement

loading
Need help?

Need help?

Do you have a question about the SuperPonics 8 and is the answer not in the manual?

Questions and answers

Summary of Contents for SuperCloset SuperPonics 8

  • Page 2: Ball Valve

    8. Please read through the entire instruction manual before you begin, including any and all instructions that come with the individual components. Let’s take a look at the layout and components of your SuperPonics 8. WATER PUMP WATER PUMP RESERVOIR DRAIN TUBE...
  • Page 3 COMPONENTS AIR PUMP AIR PUMP RESERVOIR NET CUPS AIR STONES RESERVOIR NET CUPS AIR STONES WATER PUMP AIR PUMP TUBING BALL VALVE & DRAIN TUBE WATER PUMP AIR PUMP TUBING BALL VALVE & DRAIN TUBE...
  • Page 4: Unpacking The System

    UNPACKING THE SYSTEM Carefully unbox your SuperPonics system. Remove ® all contents from inside the Reservoir as well. Prior to setup, make sure you have all of the necessary components by cross referencing with the QAC (Quality Assurance Checklist). Take this time to familiarize yourself with each of the components.
  • Page 5 SET UP Remove the lid from the SuperPonic 8 system and set it aside for now. Notice the channels located on the rim of the Reservoir. These channels will be for the placement of your Air Pump Tubing and Water Pump power cord. Locate the two gray Air Stones included in your shipment.
  • Page 6 SET UP Locate the Eco2 Air Pump included in your shipment. Connect the open end of the black tubing from the Air Stones to the metallic outputs located on the Air Pump. NOTE: THIS PUMP SHOULD NEVER BE PLACED IN WATER SUPER GROW TIP Your plant roots need and love oxygen! It is extremely...
  • Page 7 SET UP Locate the Eco-132 Water Pump. Attach the supplied 1/2” fitting to the top of the Water Pump. Place the Water Pump in the SuperPonics Reservoir near end with ® the channel in the rim. Arrange the power cord of the Water Pump into the channel located on the rim of the Reservoir.
  • Page 8 SET UP NOTE: Read the instructions for the Water Pump, as they contain valuble information on how to maintain this component. THIS PUMP SHOULD NEVER RUN WHEN NOT FULLY SUBMERGED IN WATER. Locate the Reservoir Lid. On the under side of the lid, locate the open end of the black tubing.
  • Page 9 GROWING TIPS The graphic below depicts our suggested growing setup. ROCKWOL CUBE ROCKWOL CUBE CLAY ROCKS CLAY ROCKS P R E - R O O T P R E - R O O T WATER LEVEL WATER LEVEL Water touching Water touching bottom of Net Cup bottom of Net Cup...