Download
Share
Print this page
Behringer POLY D Quick Start Manual
  1. Manuals
  2. Brands
  3. Behringer Manuals
  4. Synthesizer
  5. POLY D
  6. Quick start manual

Behringer POLY D Quick Start Manual

Analog 4-voice polyphonic synthesizer with 37 full-size keys, 4 vcos, classic ladder filter, lfo, bbd stereo chorus, distortion, 32-step sequencer and arpeggiator
Hide thumbs Also See for POLY D:

Advertisement

Quick Links

Download this manual
Synthesizers and Samplers
POLY D
Analog 4-Voice Polyphonic Synthesizer with
37 Full-Size Keys, 4 VCOs, Classic Ladder Filter,
LFO, BBD Stereo Chorus, Distortion, 32-Step
Sequencer and Arpeggiator
User Support Bulletin
Introduction
The unit is carefully calibrated at the factory. The performance may change over time or due to environmental changes,
and the following recalibration procedures can be used to bring it back to its factory settings.
Calibration Procedure
Summary:
Region A LEDs
Region B LEDs
POWER LED
CALIBRATION CHANNELS:
CHANNEL 1 — PITCH WHEEL MAX/MIN
CHANNEL 2 — PITCH WHEEL dead zone
CHANNEL 3 — MOD WHEEL MAX/MIN
CHANNEL 4 — AFTERTOUCH MIN
CHANNEL 5 — AFTERTOUCH MAX
985-40000-01084 Rev.A
page 1 of 10
2021-02-03
Confidential, for internal use only. Not to be reproduced.

Advertisement

loading
Need help?

Need help?

Do you have a question about the POLY D and is the answer not in the manual?

Questions and answers

Related Manuals for Behringer POLY D

Summary of Contents for Behringer POLY D

  • Page 1 Synthesizers and Samplers POLY D Analog 4-Voice Polyphonic Synthesizer with 37 Full-Size Keys, 4 VCOs, Classic Ladder Filter, LFO, BBD Stereo Chorus, Distortion, 32-Step Sequencer and Arpeggiator User Support Bulletin Introduction The unit is carefully calibrated at the factory. The performance may change over time or due to environmental changes, and the following recalibration procedures can be used to bring it back to its factory settings.

  • Page 2: Operation

    Follow all steps in the order in which they are presented. Start Calibration Routine 1. Press and hold button ”KYBD + STEP”, then power on POLY D. 2. When all the LEDs are running (during the first 3 seconds after power on), press button “3” to start the calibration routine.
  • Page 3 Synthesizers and Samplers POLY D Calibrate PITCH WHEEL Maximum Position Move the PITCH WHEEL to its maximum position. Region A LEDs will show maximum position of PITCH WHEEL. 985-40000-01084 Rev.A page 3 of 10 page 3 of 10 2021-02-03 Confidential, for internal use only. Not to be reproduced.
  • Page 4 Synthesizers and Samplers POLY D Calibrate PITCH WHEEL Minimum Position Move the PITCH WHEEL to its minimum position. Region A LEDs will show maximum position of PITCH WHEEL. 985-40000-01084 Rev.A page 4 of 10 page 4 of 10 2021-02-03 Confidential, for internal use only. Not to be reproduced.
  • Page 5 Synthesizers and Samplers POLY D Start PITCH WHEEL Dead Zone Calibration 1. First release PITCH WHEEL. 2. Press button “2” to calibrate PITCH WHEEL dead zone. 3. Button “2” LED will light on and region A LEDs will indicate current PITCH WHEEL position.
  • Page 6 Synthesizers and Samplers POLY D Start MOD WHEEL Calibration 1. First move MOD WHEEL to its minimum position. 2. Press button “3” to calibrate MOD WHEEL. 3. Button “3” LED will light and Region A LEDs will indicate current MOD WHEEL position.
  • Page 7 Synthesizers and Samplers POLY D Calibrate MOD WHEEL Maximum Position Move the MOD WHEEL to its maximum position. Region A LEDs will show maximum position of MOD WHEEL. 985-40000-01084 Rev.A page 7 of 10 page 7 of 10 2021-02-03 Confidential, for internal use only. Not to be reproduced.
  • Page 8 Synthesizers and Samplers POLY D Calibrate MOD WHEEL Minimum Position Move the MOD WHEEL to its minimum position. Region A LEDs will show minimum position of MOD WHEEL. Start AFTER TOUCH Minimum Position Calibration 1. Press button“4” to calibrate AFTER TOUCH minimum position.
  • Page 9 Synthesizers and Samplers POLY D Calibrate AFTER TOUCH Minimum Position Apply a small pressure to any one of the keys (or multiple keys) or do not apply any pressure. This will ensure that no after touch information is sent while keys are not being pressed.
  • Page 10 Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd.