Bluetooth Operation; Bluetooth Pairing; Connecting A Mobile Device - Dual XDMA6630 Installation & Owner's Manual

XDMA6630 OPERATION
Bluetooth
Overview
The XDMA6630 supports the HFP (hands-free profile), A2DP (advanced audio distribution
profile) and AVRCP (audio video remote control profile).
Preparation
Before you can use a mobile device with this head unit, it must be paired and connected.
Please make sure that Bluetooth is activated on your mobile device before you begin the
pairing process. Refer to the owner's manual of your mobile device for more details.
Bluetooth Pairing
1) To pair a Bluetooth enabled mobile phone to your head unit, change to Bluetooth mode
by pressing on the head unit or press MODE until "BLUE-TOOTH" is displayed.
2) Press and hold
Bluetooth icon will flash every second. The head unit will begin to broadcast the pairing
signal for 90 seconds.
3) Complete the pairing from the Bluetooth menu of your mobile device by searching
for new devices. Please refer to your mobile device instructions for further information
on Bluetooth pairing and connections. The Bluetooth icon will illuminate solid when
connected.
The BTM60 device name is "DUAL_BT"
The Bluetooth passcode "1234"
Connecting a mobile device
• If the AUTO-CON menu setting is set to OFF, you must press
after pairing.
• From Bluetooth standby mode, press and hold
• If your mobile device becomes disconnected, press
reconnect your mobile device.
• To connect a previously paired mobile device:
1) Disconnect any mobile devices by pressing and holding
2) Press SELECT. "DEVICE NAME" will appear on the LCD.
2) Turn the volume knob to cycle through the list of devices 1 through 8.
3) Press
Note: When a device number is selected, i will take a few moments for the device name to
appear on the bottom line of the LCD.
Compatibility
• Due to the differences in Bluetooth technology, some mobile devices may be
incompatible or function improperly when used with the XDMA6630.
22
Operation
®
on the head unit for 5 seconds, until "PAIRING" is displayed, the
to connect to the desired device. It must be in range to connect.
to disconnect your mobile device.
to connect you device
from Bluetooth standby mode to
for 5 seconds.