Securing The Child Seat Using The Isofix Connect System - CYBEX gold SOLUTION S-FIX User Manual

7
8
10 11
7
10
11
CLICK!
1
9
12
9
5
1800
10
11
9

SECURING THE CHILD SEAT USING THE ISOFIX CONNECT SYSTEM

Using the ISOFIX Connect system, you can fix the CYBEX SOLUTION S-FIX
to the vehicle, thereby increasing your child's safety. The child still needs to be
secured with the three-point belt of your vehicle.
• Insert the supplied ISOFIX guides (7) with the longer strap upwards into the
two ISOFIX fixture points (8). In some vehicles, it is better to mount the ISOFIX guides
(7) in the opposite direction.
NOTE! The ISOFIX fixture points (8) are two metallic clips for each seat and are
positioned between the backrest and the seating surface of the vehicle seat. In case of
doubt, please refer to the driver's manual of your vehicle.
• Use the ISOFIX adjustment lever (9) under the booster seat.
• Pull the two ISOFIX Connect locking arms (5) as far as they will go.
• Now twist the ISOFIX Connect locking arms (5) 180° so that they are facing the
direction of the ISOFIX guides (7).
NOTE! Before clicking the the ISOFIX Connect locking arms (5) into the ISOFIX fixture
points (8), check the release buttons (10). If the green safety indicators (11) are visible, you
must first release the ISOFIX Connect locking arms before joining by pressing and pulling
back the release button (10). Repeat the process if necessary with the second locking arm.
• Push the two locking arms (8) into the ISOFIX guides (7) until these lock into place in
the ISOFIX locking arms with an audible 'click'.
• Ensure that the seat is secure by trying to pull it out of the ISOFIX guides (7).
• The green safety indicator (11) must now be clearly visible on the two grey release
buttons (10).
• You can now use the ISOFIX adjustment lever (9) under the booster seat (1) of the
CYBEX SOLUTION S-FIX child seat to adjust the position.
NOTE! Note the information in the section "Placing the seat in the vehicle".