Sealey VSE2510 Instructions

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to Wear eye
instruction protection
manual
1. safety
ˆ ˆ warning! Wear approved eye protection. Wear appropriate Personal Protective equipment. A full range of Personal Protective
ˆ
ˆ
equipment is available from your sealey dealer.
ˆ ˆ warning! ensure that Health & safety, local Authority regulations and general workshop practice regulations are adhered to when
ˆ
ˆ
using tools.
ˆ ˆ Do not use tools if damaged.
ˆ 8
ˆ ˆ maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9
ˆ
ˆ ˆ ensure that a vehicle that has been raised by a jack is adequately supported. use axle stands.
9
ˆ
ˆ ˆ Do not attempt to start or move a vehicle whilst in gear and with timing devices fitted.
ˆ 8
ˆ ˆ Wear suitable clothing to avoid snagging. Do not wear jewellery. tie back long hair.
9
ˆ
Account for all tools, parts and components being used. Do not leave these in or near the engine. return tools to suitable storage
9
after use.
When not in use, store in a safe, dry childproof place.
9
ˆ ˆ Keep children and unauthorised persons away from the work area.
9
ˆ
▲ ˆ ˆ important! these instructions are provided as a guide only. always refer to the vehicle manufacturer's service
ˆ
instructions or a proprietary manual to establish the correct procedure and data.
ˆ ˆ warning! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator /
ˆ
ˆ
user must apply caution and common sense (good practical sense).
ˆ When timing an engine, always prevent the engine from being turned over. use a notice and / or inhibit the engine.
9
ˆ warning! incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. this will cause
ˆ
ˆ
damage to the engine.
introDuction
2.
oduction
Kit includes camshaft setting plates for locking the camshafts in the timed position. the plates are positioned in place of the camshaft bearing
caps. the kit also includes timing and balance shaft belt tensioner adjusters. tdc positioning tools are also required to time these engines, not
supplied in kit.
contents
3. r
item part no. Description
1 vse2510-01 camshaft locking tool - A2 (Purple)
2 vse2510-02 camshaft locking tool - s3 (Purple)
3 vse2510-03 camshaft locking tool - A2 (Blue)
4 vse2510-04 camshaft locking tool - s3 (Blue)
5 vse2510-05 timing belt tensioner
6 vse2510-06 Balance shaft tensioner
vse2515 tdc position tool
Alfa romeo, fiat
AK9634m dial gauge metric 8mm
deflection
© Jack sealey limited
instructions for
petrol engine setting/locking combination kit -
alfa romeo 1.4,1.6, 1.8, 2.0 16v twin cam
model no:
associated tools
Original Language Version
vse2510
oem no.
1.825.042.000
1.825.042.000
1.825.041.000
1.825.041.000
1.822.149.000
1.822.154.000
vs2510| issue 3(sP) 15/07/15