Table of Contents
Advertisement
Quick Links
07/06/15
051-038-NA
Universal Media Remote for PS4 – N.A. Manual
(PDP logo)
(Official Licensed Product logo)
Universal Media Remote for PlayStation® 4
Instruction Manual
051-038-NA
WARNING
Before using this product, carefully read this manual and retain it for future
reference. Additionally, read the instructions for the PlayStation® 4 System.
Do not handle damaged or leaking batteries.
What you can do with the Universal Media Remote
The Universal Media Remote uses Bluetooth® wireless technology to operate
your PS4™ system and to control the playback of common types of media,
including Blu-ray Disc media.
Infrared (IR) technology enables you to operate peripheral devices such as your
television, AV amplifier, and cable/satellite set-top box. For IR operation, you
must point the IR transmitter of the remote directly at the device. Check that
there are no obstructions between the remote control and the device.
Preparing for use
Remove the battery cover on the rear of the Universal Media Remote and insert 2 AAA
batteries. Make sure the batteries are in the correct position.
Operating the PS4™ system
Check the PS4™ system software version
To use the Universal Media Remote, the PS4™ system software must be version 2.55 or
later. You can check the system software version by selecting Settings -> System ->
System Information.
Pairing the Universal Media Remote with a PS4™ system
This operation is performed only once, when you are using the Universal Media Remote
for the first time.
1. Turn on the PS4™ system.
Advertisement
Table of Contents
Related Manuals for PDP 051-038-NA
Summary of Contents for PDP 051-038-NA
- Page 1 07/06/15 051-038-NA Universal Media Remote for PS4 – N.A. Manual (PDP logo) (Official Licensed Product logo) Universal Media Remote for PlayStation® 4 Instruction Manual 051-038-NA WARNING Before using this product, carefully read this manual and retain it for future reference.
- Page 2 4. Next, press and hold the SHARE button and the PS button simultaneously until the red LED begins to flash 5. Place the remote close to the PS4™ system and wait for “PDP Universal Media Remote for PS4” to appear in the device list.
- Page 3 (PS4) used to operate the PS4™ system (TV) used to operate the TV (AMP) used to operate the AV amplifier (CBL) used to operate a cable/satellite set-top box Operating a TV, A/V amplifier, or cable/satellite set-top box You can use the Universal Media Remote to operate a TV, A/V amplifier, or set-top box. Set the remote code to match the product in use.
- Page 4 4. On your Universal Media Remote, press and hold the gray device key, and enter the first 4-digit code from the Code List. Release the gray device key. 5. Point the remote at the target device and press the PWR key. 6.
- Page 5 If you come into contact with material from a leaking battery, take the following actions: o If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention. o If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water.
- Page 6 You are cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 7 à l’établissement d’une communication satisfaisante. Hereby, Performance Designed Products declares that this remote control is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.pdp-eu.com/doc.
Need help?
Do you have a question about the 051-038-NA and is the answer not in the manual?
Questions and answers
Punch through is not working on my remote. It works on my other, remote that is a different model working with an identical stereo.
The punch-through feature on the PDP remote model 051-038-NA may not be working because pressing the TV Power Button (instead of the TV A/V switch button) could be disabling the volume passthrough. Additionally, if the remote loses the passthrough state when it falls asleep, this could also be causing the issue.
This answer is automatically generated