3-13. REGISTER NUMBER
You can set up a register number that is consist of
the number of 2 figures.
n1
n2
Example. Set up this register number as 30.
3
0
NOTE !! After depressing the CASH/TEND key, you can finish setting up function in PGM mode.
3-14. CUSTOMER LOGO & DESCRIPTIONS
You can program customer logo, description of department and PLU in Z mode.
These consist of code numbers.
NOTE !! Refer to code table about codes.(page 27)
* Turn to control position Z.
3-14-1. CUSTOMER LOGO
customer logo consists of 5 lines and each line is programmed
up to 26 characters.
Each line is divided in to numbers.
n1
n2
└─┘
Line No.
1st line -> 11
2nd line -> 12
3rd line -> 13
4th line -> 14
5th line -> 15
#/NS
#/NS
X/TM
‥‥
n3
n4
└───────┘
Codes
MACHINE NO.
CHECK
nx
25
30