Tui Main Menu - GE Voluson Swift Instructions For Use Manual

TUI Main Menu

VCI Thickness
Preset Folder
Calc Cine
Format
2D SRI
Adjust Slices
Slice Number
Distance Between Slices
Gray/Tint Maps
Probe Orientation
Info 2D Param.
VCI Render Mode 1 (basic) VCI
Render Mode 2(mix)
Voluson™ SWIFT / Voluson SWIFT+ Instructions For Use
5831612-100 Revision 4
Figure 8-14 TUI Main Controls
Select the desired thickness (mm).
Change the preset of the selected render group.
Displays the Cine Calculations menu.
Select the desired format.
Applies the filter to the rendered 2D image only.
•
Select a format pattern in which the slices are displayed.
•
Move the center line.
•
Change the amount of slices on the left and right of the center line.
Select the desired Slice number.
Displays the distance.
Select the desired Gray/Tint Map
Open the Probe Orientation menu.
Display extended image information in the top right corner.
Select the desired Render Modes.
page 8-27.
3D and 4D Mode
For more information see ' Render Modes ' on
8-23