Table of Contents
Advertisement
Power/Menu Button – Turn on/off Mobile Hotspot. Shows device menu and information
Button Operation
Operations
Info Display
LCD Display – Provides device status information such as battery, service signal strength,
the number of users connected with Wi-Fi etc.
USB Type C Charging / Data Port – The USB charger connects here or USB connection
for tethering.
SIM Card Slot – SIM Slot for Nano SIM card. Press down the plastic flap for SIM removal
Battery contact – Insert the battery to align with the battery contacts.
Reset Button – Long press the Reset button while device is turned on. Device will
automatically reboot when reset is completed. During this process, battery should not fall
out which may brick the firmware.
Turn On
Press and hold the button for 3 seconds.
Press and hold the button until "Goodbye" message
Turn Off
appears.
Display
When the display is off (sleep mode), the first quick press
Wake-Up
of the button wakes up the display.
When the display is on, press the button quickly to go
through the device menu and information.
Colors
Off
Power off.
Solid
Power off and connected to a charger.
Blinking
Power on / Operating normally
Actions
Charging Status
4
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Franklin T10 and is the answer not in the manual?
Questions and answers
change password
To change the password on a Franklin T10 Hotspot:
1. Connect your Wi-Fi capable device to the Mobile Hotspot.
2. Open a web browser and enter: http://mobile.hotspot
3. In the Web UI, go to: Settings > Device > Web Interface.
4. Change the Web UI password from there.
If the current password is forgotten:
1. Press the reset button on the bottom of the device to perform a factory reset.
2. The Web UI password will reset to “admin.”
3. You will be required to set a new password on first login.
This answer is automatically generated