Table of Contents
Advertisement
Optical D Cable/Cap W7 Set
Optical D Cable and fixtures for mounting on PT-018.
Possible to install a second Optical D Cable for dual
strobe use.
Connector parts for transmitting light between external strobes
Optical Slave Cable (S and L sizes)
Attach harness end to other external master strobe. Attach connector
end to D-180 Optical Sensor. Light from master strobe transmitted
directly to D-180 slave.
"S" (small, for
master strobes: Inon Z-220/220S, D-180/D180S, Nikon SB-105,
Sea & Sea YS25, YS30, YS60, YS90, YS120, Ikelite DS-50, DS-125, SS-50.
"L" (large, for
Nikon SB-104, Sea & Sea YS350, YS300, Ikelite SS-100, SS-200, SS-400.
Optical D Slave Cable
Connect "Optical D Slave Cable" between a D-180 or
Z-220 strobe (Master Strobe) and an Inon Z-220 or Z-22
strobe (Slave Strobe).
Focus Light will link to and allow functioning of the
slave strobe's Focus Light and Target Laser.
INON D-180 Manual
Version 1.
October 4, 2003
Copyright 2002, 2003 by INON America, Inc. All rights reserved.
(with Clear Photo System Film)
Optical D Cable/Cap W4 Set
strobes with diameters of approx. 6 – 10cm
strobes with diameters of approx. 10 – 15cm
Light from the D-180/Z-220
Optical D Cable/Cap W3 Set
Optical D Cable/Cap W6 Set
) for master strobes: Inon Z-22,
52
) for
Optical Slave Cable
Optical D Slave Cable
Advertisement
Table of Contents
