Parameter Assignment And Structure Of The Module/Channel Parameters - Siemens SIMATIC 6DL1131-6DF00-0PK0 Equipment Manual

Parameters, diagnostics messages and address space
A.2 Parameter assignment and structure of the module/channel parameters
Error_ Error_ Cause
Code_ Code_
1 2
0xE1 0x01 Reserved bit set
0xE1 0x02 Invalid diagnostics enable bit set for operating mode
0xE1 0x03 Invalid hardware interrupt enable bit set for operating
mode
0xE1 0x07 Invalid coding for input delay
0xE1 0x0E Invalid redundancy parameter assignment
Valid parameters
Only the values specified in the following are permitted. Values that are not listed are rejected
by the module.
Every parameter data record is checked by the module. If an incorrect parameter is detected, the
entire data record is rejected and the parameters of the module remain unchanged.
A.2 Parameter assignment and structure of the module/channel
parameters
Structure of data record 128
Data record 128 is 28 bytes long.
It contains module parameters as well as all channel parameters of the 8 channels.
34
Solution
Check and correct the parameters
Equipment Manual, 10/2021, A5E39288633-AD
DI 8x24...125VDC HA