Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Garmin USB Data Card Programmer
Summary of Contents for Garmin USB Data Card Programmer
- Page 1 USB Data Card Programmer user’s manual installation guide...
- Page 2 Information in this manual is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes. Visit the Garmin web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin...
-
Page 3: Fcc Compliance
The USB Data Card Programmer does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modifi cations could result in permanent damage to the equipment, and void your warranty and your authority to operate this device under Part 15 regulations. -
Page 4: About This Manual
Garmin StreetPilot ® III with Mini-USB Data Card Programmer. To get successful results from your new USB Data Card Programmer, take time to read through this user’ s manual in order to fully under- stand all of the operating procedures. -
Page 5: Software License Agreement
WITHIN 10 DAYS OF THE DATE YOU ACQUIRED IT FOR A FULL REFUND. 1. LICENSE: Garmin (“we” or “us”) provides you with storage media containing computer software (the “Program”) which may also include digital car- tographic data and ”on-line” or electronic documentation, and printed materials together called (the “Product”) and grants you a limited non-exclusive license to use the Product in accordance with the terms of this license agreement. - Page 6 Software License Agreement 4. TERM: This License shall continue for as long as you use the Product. However, this License will terminate automatically without notice from Garmin if you fail to comply with any of its terms or conditions. You must agree, upon terminations, to destroy all copies of the Product. The Limitations of War- ranties and Liability set out below shall continue in force even after any termination.
- Page 7 16 MB Data Card 32 MB Data Card 64 MB Data Card 128 MB Data Card Check the Garmin web site or see your Garmin dealer for availability of these data cards. (accepts only Garmin USB Connector 6 Ft. USB Data Cable...
-
Page 8: Installation
Installation of the USB Programmer and Device Drivers 1. Insert either the USB Data Card Programmer CD-ROM, MapSource City Navigator CD-ROM, or MapSource Setup CD into your computer’s CD-ROM drive. It is important you insert the CD before you plug the USB Programmer into the PC! If the MapSource program is open, close the program. -
Page 9: Installing The Device Drivers
From the Control Panel, click on “System”, then the “Device Manager” tab, then click the + by “Universal serial bus control- ler”. You should see “Garmin USB Data Card Programmer” on the list. Another method would be to open the MapSource program, click the ‘Save To Device’... - Page 10 From the Control Panel, click on “System”, then the “Device Man- ager” tab, then click the + by “Universal serial bus controller”. You should see “Garmin USB Data Card Programmer” on the list. Another method would be to open the MapSource program, click the ‘Save To Device’...
-
Page 11: Software Upgrade
If you already have a version of MapSource newer than 3.05 (City Navigator, or the MapSource Setup CD), upgrading from the driver CD is not necessary. You may also visit the Garmin web site to download the most recent upgrade for MapSource. - Page 12 Disconnecting the Programmer from Your Computer After the USB Data Card Programmer has been successfully installed (hardware and software), disconnecting and reconnecting the Programmer can performed without additional installation steps.
-
Page 13: Troubleshooting Guide
Insert a Data Card into the Programmer. Push the Data Card fully into the slot in the Programmer. When properly inserted, the card will protrude approximately 1/2 inch from the slot. Insert a different card and try again. Update MapSource software from the Garmin web site. - Page 14 © Copyright 2001-2002 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 Street, Olathe, Kansas 66062, U.S.A Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K. Garmin Corporation No 68, Jangshu 2 Road, Shijr, Taipei County, Taiwan www.garmin.com...
Need help?
Do you have a question about the USB Data Card Programmer and is the answer not in the manual?
Questions and answers