Device Installation - Panasonic D-IMager EKL3104 User Manual

7.Device Installation

7.1 System Composition
1) Recommended configuration (PC)
・OS ：Windows
Windows Vista
・CPU ：Pentium
※At least one available USB 2.0 port
2) AC Adaptor（Not provided with the product）
・Output Voltage：17.1-25.2V
・Ouptput Current：>2A
・DC Jack type：EIAJ RC-5320A Voltage class5
Polarity：
3) USB2.0 cable (Not provided with the product)
USB mini-B Type plug ⇔ USB interface for PC
7.2 Connection Example
AC Adaptor
AC
7.3 Installation Process
M4 (Screw depth > 6.0mm(0.236inch))
W1/4 (Screw depth > 6.0mm(0.236inch))
・When installing the 3D Image Sensor, fix it firmly by using either one ¼ inch screw or 2 M4
screws.
・Fixation screw length is recommended to be set to 4.0 to 6.0mm depth into the screw hole.
Otherwise the sensor might not be properly fixed.
®
XP(Service Pack1, Service Pack2 , Service Pack3) 32bit
®
SP1 32bit
® ®
4, Pentium M 1GHz or more
EIAJ RC-5320A
Voltage class5
Power Supply
Cable
3D Image sensor
Sensor Unit
Note 1) Depending on the network environment or other applications etc.,
the sensor may not function.
Note 2) If you use simultaneously an other USB connected device,
this product may not function properly.
(Less than 5m(16.4ft) )
USB mini-B type
USB2.0
cable
PC
7/15