Advertisement
SERVICE POSITION AND SAFETY INSTRUCTIONS
SERVICE POSITION
Before working on the machine, park it on a level surface and put it in the "SERVICE POSITION"
1. Engine stopped, ignition key removed
(except when service requires engine
operation).
2. Tag the machine following local lockout &
tag procedure. Identify machine as "Out
of Service".
3. If body is raised, use body prop cable.
WARNING!
If work must be done on a warm machine, beware of hot fluids and components.
4. The Wheels blocked.
5. Body control lever in the "FLOAT"
position.
6. Parking brake applied.
7. Allow the machine to cool down.
8. Pressure released from all lines,
tanks, and accumulators.
GROUP 091
Page 1
Form SM638R1
Advertisement
