Status - STONEX S800 User Manual

7. Web UI Application
S800 receiver has Web UI functionality. By getting access to its internal
hotspot, you can easily manage it on the Web UI. As long as you have a
smart phone, PC or handheld with WIFI functionality, you can easily connect
to the S800 receiver to view status, download data and configure the
receiver.
S800 receiver is default to open WIFI automatically when it's powered on.
Use smart phone/PC/handheld to search the receiver hotspot, whose name is
its serial number, and connect it. (Receiver WIFI only supports getting access
to Web UI to check status and set up mode, not for Internet connection.)
After connecting to the S800 receiver WIFI, open the browser and enter
"192.168.10.1" in IP address. A window pops up and asks for user and
passport. The default user and password are shown as following:
User: admin Password: password
And then you can login the Web UI of S800 receiver.

7.1 Status

In Status, you can check the current status of receiver, including position,
data link, satellite and device information. You can see detailed information
with respective tap as illustrated in Figure 7-1.
Figure 7-1: Position Information
16
Stonex S800 GNSS Receiver - User Manual - Ver.1-Rev.0