Table of Contents
Advertisement
DOOR PHONE APARTMENT
DESCRIPTION OF THE DEVICE.......................................................2
Structure .......................................................................................2
Description of terminals ................................................................2
Button functions ...........................................................................2
Led indications .............................................................................2
INSTALLATION .................................................................................3
TECHNICAL CHARACTERISTICS ....................................................3
Cleaning ........................................................................................3
DIP-SWITCH CONFIGURATION ......................................................3
Line terminal settings ...................................................................4
Performance .................................................................................4
Call reception ...............................................................................4
Answering a call ...........................................................................4
Adjusting the ringer speaker (mute) ..............................................4
Supplementary ringer ...................................................................4
Floor call .......................................................................................4
Intercom call forwarding ...............................................................4
Door open led ...............................................................................5
OPTIONALPROGRAMMING ............................................................5
Intercom function .........................................................................5
Call tone programming .................................................................5
Reset ............................................................................................5
KIT FOR TABLE MOUNTING Ref. 1150/50 ......................................6
2 VOICE - Technical Manual
SECTION 4B
STATIONS
Download from www.urmet.com Technical Manuals area.
SECTION CONTENTS
(REV. C)
2
DESCRIPTION OF THE DEVICE.......................................................7
Structure .......................................................................................7
Description of terminals ................................................................7
Button functions ...........................................................................7
Led indications .............................................................................7
INSTALLATION .................................................................................8
TECHNICAL CHARACTERISTICS ....................................................8
Cleaning ........................................................................................8
DIP-SWITCH CONFIGURATION ......................................................9
Line terminal settings ...................................................................9
Performance ...............................................................................10
Call reception .............................................................................10
Answering a call .........................................................................10
Adjusting the ringer speaker (mute) ............................................10
Supplementary ringer .................................................................10
Floor call .....................................................................................10
Intercom call forwarding .............................................................10
Door open led .............................................................................10
OPTIONAL PROGRAMMING .........................................................10
Intercom function .......................................................................10
Call tone programming ...............................................................11
Door phone call ring tone ...........................................................11
for the centralisation of lights and rollers ...................................11
7
1
sec.4b −−−−
Advertisement
Table of Contents
Related Manuals for urmet domus 1183/5
Summary of Contents for urmet domus 1183/5
-
Page 1: Table Of Contents
SECTION 4B (REV. C) DOOR PHONE APARTMENT STATIONS Download from www.urmet.com Technical Manuals area. SECTION CONTENTS 2VOICE COMFORT DOOR PHONE REF. 1183/5 2VOICE HAND-FREE DOOR PHONE REF. 1183/7 DESCRIPTION OF THE DEVICE............2 DESCRIPTION OF THE DEVICE............7 Structure ..................2 Structure ..................7 Description of terminals ..............2... -
Page 2: 2Voice Comfort Door Phone Ref. 1183/5
Adjust door phone Designed by architect Toan Nguyen, the “Confort” door phone (Ref. Programmable and floor call volume Special Special Special 1183/5) has a perfectly fl at surface harmonized with the absence of Intercom call 3 (volume changes function function function corners. -
Page 3: Installation
2VOICE COMFORT DOOR PHONE Ref. 1183/5 INSTALLATION - TECHNICAL CHARACTERISTICS - DIP-SWITCH CONFIGURATION INSTALLATION Set a number from 0 to 126 according to the following rules: • No two apartments in the system can have the same user code. To install door phone perform the following operations: •... -
Page 4: Line Terminal Settings
2VOICE COMFORT DOOR PHONE Ref. 1183/5 PERFORMANCE user in the same apartment. All the users indoor stations will ring at the same time in the event of intercom calls to different apartments, door unit calls and fl oor calls. The following considerations, should also be taken into account:... -
Page 5: Door Open Led
2VOICE COMFORT DOOR PHONE Ref. 1183/5 OPTIONAL PROGRAMMING DOOR OPEN LED However, the call ring tone source can be identifi ed thanks to the call ring tone timing: The function is only active for the last called door phone on which... -
Page 6: Kit For Table Mounting Ref. 1150/50
2VOICE COMFORT DOOR PHONE Ref. 1183/5 KIT FOR TABLE MOUNTING Ref. 1150/50 KIT FOR TABLE MOUNTING REF. 1150/50 The door phone can be table-mounted using a specifi c transformation kit Ref. 1150/50. For installation, follow the procedure below: 1. Remove the door phone cover. -
Page 7: 2Voice Hand-Free Door Phone Ref. 1183/7
2VOICE HAND-FREE DOOR PHONE Ref. 1183/7 DESCRIPTION OF THE DEVICE 2VOICE HAND-FREE DOOR PHONE Door opener button Ref. 1183/7 Green LED under the button Terminals for connecting to the system Line termination jumper Confi guration dip switch (SW1 - SW2) DESCRIPTION OF TERMINALS Button common terminals Ref.1183/7 door phone is based on Urmet mechanical... -
Page 8: Installation
2VOICE HAND-FREE DOOR PHONE Ref. 1183/7 INSTALLATION - TECHNICAL CHARACTERISTICS To save the programming, remember to exit from the same WALL SURFACE MOUNTING by pressing the button for more then 5 seconds; in any Remove the plastic base from the door phone unit and fi x the base to case, after 10 minutes the device exists the programming the wall as shown in the drawing here below. -
Page 9: Dip-Switch Configuration
2VOICE HAND-FREE DOOR PHONE Ref. 1183/7 DIP-SWITCH CONFIGURATION DIP-SWITCH CONFIGURATION CODE CODE 44 CODE 45 CODE 46 CODE 47 CODE 48 CODE 49 CODE 50 CODE 51 Default setting: default door phone settings are: CODE n.1 = OFF “Hands free” (default) / ON “Push to talk”; CODE n.2-8 = 126 CODE 52 CODE 53... -
Page 10: Line Terminal Settings
2VOICE HAND-FREE DOOR PHONE Ref. 1183/7 PERFORMANCE - OPTIONAL PROGRAMMING SUPPLEMENTARY RINGER The door phone is equipped with a pair of terminals (S+, S-) for connecting a supplementary ringer or a relay. This ringer is controlled CODE 120 CODE 121 CODE 122 CODE 123 when any call tone is generated. -
Page 11: Call Tone Programming
2VOICE HAND-FREE DOOR PHONE Ref. 1183/7 DIP-SWITCH CONFIGURATION INTERCOM FUNCTION IN THE SAME APARTMENT CALL TONE PROGRAMMING Go to the apartment station to be programmed as caller (indoor In 2VOICE system each user can select the door phone call ring tone station C1). - Page 12 −−−− sec.4b 2 VOICE - Technical Manual...
Need help?
Do you have a question about the 1183/5 and is the answer not in the manual?
Questions and answers
Die neue Sprechanlage funktioniert ****. Nach dem Klingelton drücke ich die Taste mit dem Schlüssel. Man hört einen Klick, aber die Haustür öffnet sich ****
The Urmet Domus intercom model 1183/5 may not open the front door after pressing the key button due to the following possible reasons:
1. Programming Mode Active – If the device is in programming mode (indicated by a slowly blinking yellow LED), it will not execute normal operations until programming is exited.
2. Automatic Door Opening System Not Connected or Disabled – The system may not be properly connected or enabled, preventing the door from unlocking.
3. Incorrect Configuration – The dip switch settings might not be correctly set to define the station and apartment number.
4. Power or Wiring Issues – A faulty connection in the system bus or power supply could prevent the door lock from receiving the signal.
5. Call Not Received or Answered – Some models require the user to establish a call before activating the door release function.
6. Hardware Malfunction – A defective button, wiring issue, or a problem with the electric lock may cause the failure.
Checking these issues can help troubleshoot and resolve the problem.
This answer is automatically generated