Table of Contents
Advertisement
Configuring converters / Interface of software
3.3 Interface of software
Service S6 MasterCAN software is launched with
installation. Software interface consists of Horizontal menu, Vertical menu, Unit ID area
and Information and Configuration area (see figure 15).
Unit ID
area
Vertical
menu
Figure 15 — Interface of Service S6 MasterCAN software
ATTENTION:
window is automatically set to full screen. In this case scroll bars are used to display
unseen areas.
Unit ID area provides information about the model, serial number, manufacturing date and
firmware version of the connected converter.
Horizontal menu provides the following:
•
connection/disconnection of the converter;
•
profile options (loading profile, saving profile, printing profile);
•
updating firmware of the converter;
•
S6 Database update in the service software (in case the PC has Internet access);
•
selection of interface language;
•
viewing help file and information about the utility.
Vertical menu is used for selection of
parameters and configuration are displayed in Configuration and Information area.
Function modules of Service S6 MasterCAN software are based on
from S6 Database (see
The
detailed
description
https://www.jv-technoton.com/
Information and Configuration area displays names (PGN) and parameters (SPN) of the
messages. Each SPN holds the following: data range, discretion, measuring units.
MasterCAN RS2CAN / CAN2RS data converters. Operation manual. Version 1.0
© Technoton, 2020
At lower screen resolutions (less than 1024x768) Service S6 MasterCAN
annex
A).
of
S6
Database
part
Data
base.
desktop shortcut created during
Function modules
can
be
found
Horizontal
menu
Information and
configuration area
of converter. Its current
PGN
and
SPN
messages
in
the
web-page
28
Advertisement
Table of Contents
