Table of Contents
Advertisement
Quick Links
Model
Max Tongue Weight (lb)
94-00-0600
600
94-00-0800
800
94-00-1000
1,000
94-00-1061
1,000 w/installed hitch ball 10,000
Hitch balls not included.
Your model # can be found on the stickers on either spring bar. Make a
note of it here for future reference.
fastwaytrailer.com
owner's manual
Max Trailer Weight (lb)
6,000
8,000
10,000
Fastway e2 Hitch - Faster, Easier.
™
A Product of Progress Mfg. Inc.
Advertisement
Table of Contents
Related Manuals for Fastway e2 Hitch 94-00-0600
Summary of Contents for Fastway e2 Hitch 94-00-0600
- Page 1 Hitch balls not included. Your model # can be found on the stickers on either spring bar. Make a note of it here for future reference. Fastway e2 Hitch - Faster, Easier. ™ fastwaytrailer.com A Product of Progress Mfg. Inc.
-
Page 2: Table Of Contents
Table of Contents Parts Breakdown Safety Information Installation Step 1 – Ready the Tow Vehicle and Trailer Step 2 – Install the Hitch Ball Step 3 – Attach the Hitch Head to the Shank Step 4 – Assemble the Sway Brackets Step 5 –... -
Page 3: Parts Breakdown
Parts Breakdown... -
Page 4: Safety Information
The weight distribution setup and towing Fastway brand hitch balls should be tightened to 420 ft-lb with a 1 7/8” socket. Contact an performance should be evaluated by the operator and adjusted when necessary. -
Page 5: Step 3 - Attach The Hitch Head To The Shank
Do not use an impact wrench to tighten the link plate or Fastway shank to place the hitch ball at the correct height. (Figure 3) L-bracket bolts. -
Page 6: Step 5 - Install Spring Arms
3. Insert the bolt head into the slot and add a ½” lock washer and Step 5 – Install Spring Arms thread a ½” nut onto the end of the bolt. ÁWARNING Inverted or Upside-Down Installation – Bottom-mounted Never tow with loose socket bolts. Tighten socket bolts to a minimum of 60 Couplers, V-nose Trailers ft-lb before you tow. -
Page 7: Step 7 - Adjust Weight Distribution
Retract the jack until the full weight of the trailer tongue is on the hitch. Verify that there is a minimum of 3” from the end of the spring arms to the center of the Weight Distribution Setup Table Front Fender Height Example L-bracket. -
Page 8: Step 8 - Adjust Trailer Pitch
Do not paint over the warning stickers. If the warning stickers front and rear of the trailer frame. become unreadable, contact Fastway for a free replacement. If the difference between the front and rear measurements is more than 1 ¼” adjust the hitch A properly maintained and clean hitch will perform better and reduce wear and towing noise. -
Page 9: How To Hitch
How to Hitch Appendix – Using a Weight Distribution Hitch with Auto-Leveling Suspensions 1. With the Fastway hitch head installed, position the hitch ball Figure 27 directly under the trailer coupler. (Figure 27) Always refer to and follow your tow vehicle owner’s manual or air bag instructions for their 2. -
Page 10: Warranty
Submit your warranty registration online at fastwaytrailer.com. Find us online We would love to connect with you. Find us on these social media platforms. YOUTUBE youtube.com/fastwaytrailer FACEBOOK facebook.com/fastwaytrailer Twitter twitter.com/fastwaytrailer INSTAGRA instagram.com/fastwaytrailer Visit Fastway® Trailer Products at www.fastwaytrailer.com for faster and easier towing solutions.
Need help?
Do you have a question about the e2 Hitch 94-00-0600 and is the answer not in the manual?
Questions and answers