ELECTRICAL SYSTEM TROUBLESHOOTING
FUSE BLOCK TABLES
The fuse block contains diodes, fuses, and relays. The fuse block is located under the seat.
NOTE: If a diode is removed, make sure that the diode is installed in the correct position.
Main Harness Differences:
• The 1st generation main harness has a 30A ATC charger fuse and a 10A accessory fuse.
• The 2nd generation main harness has a 20A fast acting charger fuse and a 10A accessory fuse.
• The 3rd generation main harness has a 20A fast acting charger fuse and a 15A accessory fuse.
1st and 2nd Generation Harness Fuse Block (Figure 12-6)
COMPONENT
10A HORN
ACC RELAY
D1
D2
D3
5A DIAG
10A ACC
34 - 60
Figure 12-6 1st and 2nd Generation Harness Fuse Block
Tempo, Tempo Connect, and Tempo 2+2 Maintenance and Service Manual
Diode, Fuse, and Relay Locations
DESCRIPTION
1A Diode – VCM Ignition Sense
1A Diode - Interlock
3A Diode - BMS 12V Output
5A Fuse - Diagnostic Receptacle
10A Fuse - Horn
10A Fuse - Accessories
Accessory Relay
Open
12
Page 12-7
Need help?
Do you have a question about the Tempo 2020 and is the answer not in the manual?
Questions and answers