Dhollandia DH-AI Series Operation Manual
  1. Manuals
  2. Brands
  3. Dhollandia Manuals
  4. Lifting Systems
  5. DH-AI Series
  6. Operation manual
Dhollandia DH-AI Series Operation Manual

Dhollandia DH-AI Series Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DH-AI* manual ramp
OPERATION MANUAL
Manufacturer:
DHOLLANDIA N.V.
Zoomstraat 9
9160 LOKEREN (Belgium)
Tel : +32 (0)9 349 06 92
Fax : +32 (0)9 349 09 77
e-mail : info@dhollandia.be
website : www.dhollandia.com
Read the manual in its entirety before operating the ramp
Keep this manual in the vehicle cab, as reference for the driver and lift operator
Order ref: xxx Doc: USE-CE UKCA Operation manual DHAI_EUR EN_2021
Rev: 0 Date: SEP 01, 2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH-AI Series and is the answer not in the manual?

Questions and answers

Related Manuals for Dhollandia DH-AI Series

Summary of Contents for Dhollandia DH-AI Series

  • Page 1 9160 LOKEREN (Belgium) Tel : +32 (0)9 349 06 92 Fax : +32 (0)9 349 09 77 e-mail : info@dhollandia.be website : www.dhollandia.com Read the manual in its entirety before operating the ramp Keep this manual in the vehicle cab, as reference for the driver and lift operator...

  • Page 2: Table Of Contents

    Emergency operation with OAP824 ..........................34 Decals ...................................... 35 10.1 Introduction ..................................35 10.2 Regular decals on the ramp ............................35 10.3 Decals inside the vehicle ..............................36 Meaning of safety and warning signs ............................37 End note....................................39 DHOLLANDIA...

  • Page 3: Understanding Safety And Warning Signs

    Prior to operating the ramp, make sure you understand the safety and warning signs used, and read them in conjunction with the instructions in this manual.  If in doubt, DO NOT operate the ramp. Contact your national DHOLLANDIA distributor. See page 3 for contact info. DHOLLANDIA...

  • Page 4: Contact Information And Disclaimers

    NOTICE Please confirm you have reviewed the most up-to-date version of this manual prior to operation of the associated DHOLLANDIA ramp. See below for instructions to download the latest version of the manual.

  • Page 5: General Introduction

     The manuals mentioned below apply to ramp types DH-AI01.04, DH-AI02.04, DH-AI12.04, DH-AI13.04, DH-AI12.10 operating in a similar way. In case of any doubt, always contact your national DHOLLANDIA distributor. See contact info on page 3.  This OPERATION MANUAL explains how the DHOLLANDIA DH-AI-series ramps are manufactured; what safety features are incorporated in its design;...

  • Page 6: Identification

     Every DHOLLANDIA product is identified by and labelled with a unique 8-digit serial number (with or without a space between the first and last 4 digits). Use this number for any inquiry on a particular ramp, or when ordering replacement parts.

  • Page 7: Description And Terminology

    As the ramps come in different versions, it is important to check the capacity of your specific ramp.  DHOLLANDIA lifts and ramps are developed and manufactured using state-of-the-art technology, high quality materials and components, and highly skilled workmanship. They comply with the European CE / UKCA safety regulations mentioned in the Declaration of Conformity issued with each lift and ramp (unless otherwise agreed for products exported outside the CE / UKCA region).
  • Page 8 On demountable ramps DH-AI01 / AI02, support rubbers are used as feet to rest the ramp frame on the vehicle floor. Side supports [DH-AI01 / AI02]: protect the ramp when placed on its side. DH-AI fixed frame ● TERMINOLOGY DHOLLANDIA...
  • Page 9 DH-AI pivoting frame option OAF820.L ● TERMINOLOGY DH-AI12.04 ● TERMINOLOGY DHOLLANDIA...
  • Page 10 DH-AI13.04 ● TERMINOLOGY DH-AI12.10 ● TERMINOLOGY DHOLLANDIA...
  • Page 11 Portable ramp DH-AI01.04 ● TERMINOLOGY Portable ramp DH-AI02.04 ● TERMINOLOGY DHOLLANDIA...

  • Page 12: Safety Features

    SAFETY FEATURES DHOLLANDIA ramps are equipped with multiple safety features to enable its intended use with a maximum degree of safety for the operator, the wheelchair occupant on the platform and any incidental bystanders. The following safety features are incorporated on the DH-AI*...

  • Page 13: Safety Instructions For Using The Ramp

     DHOLLANDIA ramps shall be exclusively used in accordance with the INTENDED USE as described in section 4 on page 4, within the limits of the applicable load chart, in compliance with the operator instructions and safety instructions in this manual.
  • Page 14 To reduce the risk of serious bodily injury or death which may result from other vehicles when parked, ALWAYS make sure a safety distance of 16 ft or 5 m is kept between the back of the vehicle and the following vehicle. DHOLLANDIA...
  • Page 15 Inspect the ramp prior to each use. If any unsafe condition exists or unusual noises or movements are noticed, DO NOT use the ramp and contact an authorized DHOLLANDIA service agent for repair. Please see ‘pre-trip inspection’ procedures under 7.7 from page 23 onwards.
  • Page 16 Above all, USE GOOD COMMON SENSE when operating the ramp. DO NOT operate the ramp until the contents of this manual have been read and fully understood. Improper use of the ramp increases the risk of serious bodily injury or death to the operator and any bystanders. DHOLLANDIA...
  • Page 17 For specific applications or work conditions, other instructions might be appropriate to reach a higher level of safety. If contra- indications exist, a formal risk analysis must be performed by the client’s health and safety management and safe work procedures for the drivers and operators must be issued. DHOLLANDIA...

  • Page 18: Danger Zones, Risk Of Crush And Shear Injury

     NEVER reach over or through any of the moving parts of the ramp.  ALWAYS keep visual control over the entire working area of the ramp. DHOLLANDIA...
  • Page 19 Any persons assigned to assist the wheelchair or platform occupant with embarkation or disembarkation, MUST ALWAYS stay out of reach of the platform until it has reached its final position and has come to a complete stop, either at the ground or at the vehicle floor. DHOLLANDIA...

  • Page 20: Additional Instructions For Ramp Passengers

    / or wheels of the wheelchair are wet or dirty.  Disembark the vehicle slowly and in a controlled manner. Rolling off in an uncontrolled manner may result in serious personal injury to the wheelchair occupants or any persons standing near the platform. DHOLLANDIA...
  • Page 21  to hold back, slow down or stop the weight of the wheelchair and its occupant when coming down the ramp;  without slipping or falling down.  If in doubt, DO NOT continue. Seek help. Make sure all persons involved follow the safety instructions carefully.  ALWAYS keep the wheelchair in the centre of the platform. DHOLLANDIA...

  • Page 22: Additional Instructions For Loading Cargo

     without slipping or falling down.  If in doubt, DO NOT continue. Seek help. Make sure all persons involved follow the safety instructions carefully.  ALWAYS keep the load in the centre of the platform. DHOLLANDIA...

  • Page 23: Maximum Rated Capacity

     In case of heavy point loads (e.g. heavy weight on only 3 or 2 wheels), the safe working load MUST be limited to 75% of the maximum rated capacity.  The dimensions of the load or wheelchair should never exceed those of the platform. The load or wheelchair should never protrude beyond the perimeter of the platform. DHOLLANDIA...

  • Page 24: Recommended Daily Pre-Trip Inspection

    DO NOT cover up any accidents or damage; it can be dangerous to you, your co-workers, and other persons. NOTICE Authorized DHOLLANDIA service agents may be found at www.dhollandia.com or by calling your regional DHOLLANDIA distributor. See page 3 for contact info.

  • Page 25: Importance Of Preventative Maintenance

    Competent and regular preventative maintenance is essential to the operational reliability of the ramp as well as the safety of the operator, wheelchair occupants and any bystanders.  All maintenance and repair work must be performed by authorized DHOLLANDIA service agents and using original DHOLLANDIA replacement parts only. ...

  • Page 26: Operating Instructions - Principles And Procedures

    On DH-AI13: this lock needs to be manually opened to unfold the flip-over point; and manually closed to stow the flip-over point in its travel position.  On DH-AI02: this lock keeps the 2 sections of the platform together so that it is easy to transport. DHOLLANDIA...

  • Page 27: Operation Of Dh-Ai12

      Fold open the platform and let the wheels roll on Make sure the platform is fully aligned with the ground and that the the ground. platform is supported by both wheels. DHOLLANDIA...
  • Page 28 The platform lock will engage when the travel position has been reached. the platform gently towards its travel position.  Verify that the platform is securely locked on both sides.  If so equipped [option OAT801], fasten the safety belts. DHOLLANDIA...

  • Page 29: Operation Of Dh-Ai13

    Release the lock on the side to fold open the third part of the platform. support feet on the ground.  Make sure the platform is fully aligned with the ground and that the outboard platform edge rests on the ground over its full width. DHOLLANDIA...
  • Page 30 Adjust the length of the support legs or underfill them with support blocks prior to loading or unloading.  In case of problems with the alignment of the platform or the set-up of certain parts, consult the INSTALLATION MANUAL. DHOLLANDIA...

  • Page 31: Operation Of Pivoting Frame Oaf820.L

    Engage the quick-release lock on the right side of the platform to secure the platform back in its travel position.  With option OAF821, a second locking position for the platform inside the vehicle can be acquired. See the INSTALLATION MANUAL for fitting instructions. DHOLLANDIA...

  • Page 32: Operation Of The Portable Ramp Dh-Ai01.04

    Make sure the ramp is fully aligned at both ends: the inboard platform edge with the vehicle floor and the outboard edge with the ground. Make sure the 4 corners are in firm contact with a hard surface (not floating). DHOLLANDIA...

  • Page 33: Operation Of The Portable Ramp Dh-Ai02

    In case of problems with the alignment of the platform or the set-up of certain parts, consult the INSTALLATION MANUAL. Contact your national DHOLLANDIA distributor when in doubt and before making any permanent changes. See contact details on page 3.

  • Page 34: Emergency Operation: Oap825

    Prior to operating the emergency operation of the ramp, ALWAYS make sure you follow all applicable instructions. WARNING  Make sure the area behind the platform is completely clear and the platform can be deployed safely.  Keep head, hands and feet clear of pinch points and moving parts. DHOLLANDIA...

  • Page 35: Emergency Operation With Oap824

    If the ramp is equipped with option OAP824, this additional lock must disengaged before the ramp can be pushed outwards.  Kick or push the lever down to disengage the lock.  Then, continue to push the platform open in accordance with the instructions under 9.1. DHOLLANDIA...

  • Page 36: Decals

     NEVER remove or paint over any decal. Missing, worn or illegible warning decals must be immediately replaced. Get replacement decals from DHOLLANDIA. Contact your national DHOLLANDIA distributor. See page 3 for contact info.  The operator should comply with all affixed safety and operation decals. Beware that the decals merely summarize the main points, and that the operator must know, understand, and comply with the full contents of the operation manual.

  • Page 37: Decals Inside The Vehicle

    10.3 DECALS INSIDE THE VEHICLE  The following decal is supplied loose with the ramp and shall by affixed by the installer near the ramp at a location clearly visible to the operator, preferably inside the vehicle to maximize longevity. DHOLLANDIA...

  • Page 38: Meaning Of Safety And Warning Signs

    11 MEANING OF SAFETY AND WARNING SIGNS WARNING signs MANDATORY ACTION signs Overview and keep visual control over the Contact your regional DHOLLANDIA distributor. working area of the tail lift at all times. General warning sign used to alert the user to Consult the DHOLLANDIA website.
  • Page 39 / or Switch between external and internal controls. cabin switch. This is an operation to be executed manually (as opposed to an electrical function controlled by means of one of the control units). DHOLLANDIA...

  • Page 40: End Note

    → Country & language selection → Downloads → Checklists → … select required manual  All maintenance and repair work should be performed by authorized DHOLLANDIA service agents and using only authorized OEM DHOLLANDIA replacement parts.  Consult the separate MAINTENANCE AND REPAIR MANUAL for safety instructions, maintenance guidelines, and troubleshooting support.

This manual is also suitable for:

Dh-ai01Dh-ai02Dh-ai12Dh-ai13

Table of Contents