Flash Programmer Writeez3; Device Setup; Figure 50: Writeez3 Startup; Figure 51: Writeez Device Setup Dialogue - NEC 78K0 User Manual

78K0 - Shine It!

8. Flash Programmer WriteEZ3

The WriteEZ3 is flash programming software to flash hex files to the related device. For installation
information refer to the chapter WriteEZ3 installation.

Figure 50: WriteEZ3 Startup

8.1 Device Setup

To provide all necessary information about the device to be programmed, only the corresponding flash
parameter file must be loaded. The parameter file (*.prm) for the µPD78F8024 is located on the CDROM, in
the same folder as the WriteEZ3 setup file. Please use the menu "Device -> Setup..." to open the following
dialogue and the button "PRM File Read" to select the parameter file.

Figure 51: WriteEZ Device Setup Dialogue

User's Manual U19610EE3V0UM00
45