Advertisement
InstallatIon and operatIon InstructIons
Due to continuing improvements, actual product may differ slightly from the product described herein.
Visit our website at: http://www.harborfreight.com
to preVent serIous Injury, read and understand
all warnIngs and InstructIons before use.
Copyright
2001 by Harbor Freight Tools
©
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
ELECTRONIC
DIGITAL SAFE
45891
. All rights reserved. No portion of this
®
reVIsed 07b
Advertisement
Table of Contents
Related Manuals for Bunker Hill Security 45891
Summary of Contents for Bunker Hill Security 45891
- Page 1 ELECTRONIC DIGITAL SAFE Model 45891 InstallatIon and operatIon InstructIons Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com to preVent serIous Injury, read and understand all warnIngs and InstructIons before use.
- Page 2 It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. reV 02d, 04c, 07f SKU 45891 for technical questions, please call 1-800-444-3353. Page 2...
- Page 3 To override the electronic locking device, detach the Front Panel from the Safe. There is a sticker to the left of the keypad, with SKU# 45891 printed on it. Gently peel off that sticker. See Figure 1.
- Page 4 As you tighten the nuts onto the bolts, the fasteners will expand inside the cement, securing the safe into place. note: There are no replacement parts available for this product. reV 04a, 07b SKU 45891 for technical questions, please call 1-800-444-3353. Page 4...
Need help?
Do you have a question about the 45891 and is the answer not in the manual?
Questions and answers
The battery is dead and can’t find the key
To replace the batteries for the Bunker Hill Security Model 45891, follow these steps:
1. Check if the Red Light and Green Light are both lit, indicating the need for a battery change.
2. Open the safe using the existing code.
3. Locate the Battery Compartment on the inside of the door.
4. Slide off the Battery Cover.
5. Remove the used batteries and insert four new AA batteries.
6. Test the code before closing the door.
If the key is lost and the batteries are dead, you may not be able to open the safe to access the Battery Compartment. Since the emergency key is required for override, you may need to contact technical support at 1-800-444-3353 for further assistance.
This answer is automatically generated
can i get a new set of keys N352039 for gordon eds 45891
are these fire proof
The provided information does not state that Bunker Hill Security part number 45891 is fireproof. Therefore, it cannot be determined from the context.
This answer is automatically generated
Can I get a new key for Bunker hill digital floor safe sku# P45891
There are no replacement parts available for this product, so you cannot obtain a new key for the Bunker Hill Security digital floor safe model 45891.
This answer is automatically generated