1. Manuals
  2. Brands
  3. Trust Manuals
  4. Webcam
  5. SpaceCam 380
  6. Instruction manual

Trust SpaceCam 380 Instruction Manual

Usb 2.0 webcam
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Method when using for the first time
1.
Uninstalling old drivers and devices
2.
Installation in Windows 98/ME/2000/XP
3.
Connecting
Checking after the installation
4.
5.
Using the camera
1
Introduction
This instruction manual is for users of the TRUST 380 USB 2.0 SPACEC@M. The
TRUST 380 USB 2.0 SPACEC@M is intended to be used in combination with a USB
2.0 USB port. The Trust 380 USB 2.0 SPACEC@M can be used to make short films,
take photographs (snapshots) or as a webcam during video conferencing.
2
Safety
Read the following instructions carefully before use.
- The TRUST 380 USB 2.0 SPACEC@M does not require any special
maintenance. Use a slightly damp, soft cloth to clean the camera.
- Do not use aggressive substances, such as benzene or white spirit, to clean the
device. These may harm the material.
- Do not submerge the device in liquid. This may be dangerous and will damage
the device. Do not use this device near water.
- Make sure nothing is placed on the cable. Do not use this device in an area
where the cable can become worn or damaged as a result of people walking over
it.
- Do not repair this device yourself.
3
Approval
- This device meets the essential requirements and other relevant conditions of the
applicable European directives. The Declaration of Conformity (DoC) is available
at www.trust.com/13497/ce.
4
Installation
4.1
Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old device. The best solution is to first remove all drivers related to old
devices before installing the new driver.
1.
Enter the Windows 'Safe Mode' (press F8 when starting Windows and then
select 'Safe Mode' from the menu which will be displayed).
2.
Click on 'Start – Settings – Control Panel' and double-click on the
'Add/Remove Programs' icon.
3.
Find all the programs for similar, old devices and remove these by clicking on
the 'Add/Remove' button. When in the 'Safe Mode', it is possible for some
programs to appear twice. In that case, remove the duplicates as well.
4.
Restart the computer.
TRUST 380 USB 2.0 SPACEC@M
Chapter
!
(4.1)
U K
(4.2)
(4.3)
(4.4)
(4.5)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SpaceCam 380 and is the answer not in the manual?

Questions and answers

Related Manuals for Trust SpaceCam 380

Summary of Contents for Trust SpaceCam 380

  • Page 1 TRUST 380 USB 2.0 SPACEC@M is intended to be used in combination with a USB 2.0 USB port. The Trust 380 USB 2.0 SPACEC@M can be used to make short films, take photographs (snapshots) or as a webcam during video conferencing.

  • Page 2: Checks After Installation

    If it does not start automatically, do the following: Select 'Run' from the Windows ‘Start’ menu. Type [D:\SETUP.EXE] and click on 'OK' to start the Trust Software Installer. The Trust installation window will appear. See figure 1.

  • Page 3: Installing The Application Software

    Windows ME/ Windows 2000) NetMeeting is a program that is supplied with Windows 98 / Windows ME / Windows 2000. With this program, you can use the Trust 380 USB 2.0 SPACEC@M Portable as a webcam. NetMeeting is installed as follows: Click on the ‘Start’...

  • Page 4: Using The Camera

    Windows Messenger from the ‘Start’ menu to start the program. Follow the instructions to input your personal settings. Once the program has been installed, you can connect the Trust 380 USB 2.0 SPACEC@M to your computer and download recordings.
  • Page 5 TRUST 380 USB 2.0 SPACEC@M The image being seen by the webcam appears in the window. Now choose the option ‘Set capture file’ from the ‘File’ menu. Give a location and a name for the video you are going to make. You must always put a ‘.AVI’...
  • Page 6 A new window will appear. You can enter a name for your TRUST 380 USB 2.0 SPACEC@M in the new window that has appeared. At least 4 and at most 32 characters. Spaces are not allowed here either.
  • Page 7 TRUST 380 USB 2.0 SPACEC@M Now you can set the desired resolution using the configuration button (c, figure 5). Click on ‘Apply’ and then on ‘OK’ to confirm the setting you have made. You will then be returned to the window in figure 5.
  • Page 8 Honestech software. Start the help feature using ‘Start – Programs – Trust – 380 USB 2.0 SPACEC@M’. Here you can click on the ‘Help Function for Camera Plus’ to open the help feature.
  • Page 9 TRUST 380 USB 2.0 SPACEC@M Use the slider bar (A, figure 14) to indicate the point where you want the video clip to stop. Confirm the chosen end point by clicking the ‘Mark out’ button (C, figure 14). Click on the ‘Save’ button (E, figure 14) to store the changes.

  • Page 10: Troubleshooting

    Activate: ‘Start – Settings – Control Panel’ and then double-clicking on the ‘Add/Remove Programs’ icon. Here you should select the “TRUST 380 USB 2.0 SPACEC@M“. Now click on the ‘Delete’ button. Follow the steps that appear on your screen to remove the camera correctly.
  • Page 11 Troubleshooter. If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centers. You can find more information on the back of this instruction manual. Please have the following information available: •...

  • Page 12: Warranty Conditions

    TRUST 380 USB 2.0 SPACEC@M Warranty conditions - Our products have a two-year manufacturer's warranty, which is effective from the date of purchase. - If there is a fault, return the product to your dealer and include an explanation of the fault, the proof of purchase and all the accessories.

This manual is also suitable for:

13497

Table of Contents