Nokia HH-12 Manual page 6

Mount the mobile holder
To attach a compatible Nokia
mobile holder to the mounting
plate, use the screw supplied with
the holder.
For example, to use the mobile
holder CR-39, remove the
protection plate with the Nokia
text from the holder, attach the
holder to the mounting plate with
the supplied screw, and replace
the protection plate (7). Insert
your phone into the holder, and
press the clamps at the sides of
the holder until the phone is
6
firmly in place. To release the
phone, press the button below
the left clamp. The mobile holder
CR-39 supports mobile devices
with the following dimensions:
height 95 - 120 mm, width 42 -
55 mm, thickness 13 - 26 mm,
weight 200 g at maximum.
When attaching a mobile holder,
ensure that the phone display is
clearly visible for the user. For
your safety, install the holder in
the upright position.
© 2008 Nokia. All rights reserved.