5-1. Connection of Display Unit and Display Controller
Cable length: 1 m
1: If the cables and cords are not supplied, prepare them separately. (Refer to "Installation" in Section 1-4-1.)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
Section 5
Connection
To the circuit
breaker
Cable length: 10 m or less
Cable length:
1 m
To the circuit breaker
: Category 7-equivalent cable
(supplied accessory)
: Category 7 cable
(Prepare it separately.)
: Power cord
(Prepare it separately.)
: Power cord
(Prepare it separately.)
: Power cord
(supplied accessory)
Cable length: 1 m
When you disconnect the category
7-equivalent cable, hold the plug,
then pull it horizontally.
Do not pull it on the skew.
To the circuit breaker
To the circuit breaker
To the circuit breaker
1
1
5-1 (E)