Action Overlay Mode; Underwater Mode - Kyocera DuraForce PRO 2 User Manual

Tap to record a video. Tap
recording, tap
Tap Thumbnail to view the image you've just taken or recorded.
5.

Action Overlay Mode

You can take a photo or record a video with additional information such as elapsed time, travel
distance, speed, G-force, altitude, date and time, or route.
WARNING: Do not operate the app while driving or riding a bicycle or motorcycle. If necessary,
stop moving first and operate the app with careful attention to your safety.
► From the Home screen, tap
NOTE: Action Overlay mode uses location information.
the Location settings if they are disabled.
Action Overlay Mode Settings
You can configure the Action Overlay mode settings by tapping
available:
●
Altitude settings: Select Feet (ft) or Meter (m). Tap Altitude correction to set the
desired altitude.
●
Speedometer settings: Select Mile (mi) with mph, Kilometer (km) with km/h or
Nautical mile (nm) with knots for Units with its Max speed.
●
Select display data: Check or uncheck the checkbox for Speedometer, Elapsed time,
Distance, Altitude, G-force, Date & time, and Route.
●
Screen rotation: Switch Screen rotation On and Off.
●
Screen lock: Switch Screen lock On and Off.
NOTE: Screen will lock after recording begins to avoid accidental operations.

Underwater Mode

You can take a picture or record a video also in the water. Your phone is immersible in water for
up to 30 minutes at a depth not exceeding two meters (about 6.56 ft.).
WARNING: Avoid using phone in saltwater. It is highly corrosive and can damage internal
components and degrade the audio performance over time.
1. From the Home screen, tap
or
.
>
>
to pause or resume recording. To stop
> Action Overlay.
ou will be prompted to enable
Y
.
> Mode > Underwater.
64
The following options are
Camera and Camcorder