. Use the number keys to enter the current hour and minute, then
use the caller ID-volume (5 or 6) to select AM or PM.
5. Press the mute/menu OK button to save your selection. You
will hear a confirmation tone and the current time shows in the
display.
Area Code
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the AREA
CODE sub-menu.
. Press mute/menu OK button to enter the menu. The screen
displays SET AREA CODE - - -.
. Use the touch-tone pad to enter your -digit area code.
. Press the mute/menu OK button to confirm. You will hear a
confirmation tone and the screen displays the new area code.
NOTE: To restore the default setting to - - -, press and
release delete/int/conf when the screen displays SET AREA
CODE.
Tone/Pulse
From the Initial Setup Menu:
1. Press the caller ID-volume (5 or 6) button to scroll to the TONE/
PULSE sub-menu.
. Press mute/menu OK button to enter the menu. The screen
displays 4TONE PULSE. The default setting is TONE.
. Use the caller ID-volume (5 or 6) to select TONE or PULSE.
. Press the mute/menu OK button to confirm. You will hear a
confirmation tone and the screen displays your selection.