5-10 Installing the Operating System with Express Setup
6.
Select the operating system to install.
Select [Install the Windows (32bit editions)] from the menu and click [Next].
7.
Enter the logical drive settings.
The [Enter RAID settings] steps are displayed. Confirm the parameters, modify if
necessary, and then click [Next].
NOTES:
You can use only the physical devices that have the same model
number to configure a logical drive.
If the process does not complete normally, the driver may not be
stored in EXPRESSBUILDER. Refer to "Optional Board
Supported by NEC EXPRESSBUILDER" described earlier in this
chapter.