Advertisement
o
AUTO mode will automatically turn the fan on when your system is either heating or cooling.
o
CIRCULATE will turn the fan on for 15 minutes every hour by default. The duration for CIRCULATE can be configured from
the online account.
Changing the humidity mode
The thermostat can adjust the humidity level in your home by directly controlling an external humidifier or dehumidifier.
For an external humidifier or dehumidifier, the thermostat must be configured to use the Z1 or Z2 terminal. Z1 and Z2 configu ration
can be found in the Settings section of the Installer menu. If a cooling system is present without an external dehumidifier, the
thermostat will extend your cooling cycles in an attempt to reach your dehumidification setpoint.
Select the mode for which you would like to control humidity.
1.
Press the MENU button.
2.
Select SETTINGS.
3.
Select USER.
4.
Select HUMIDITY.
5.
Select MODE. Modes include OFF, DEHUMID, HUMID, and AUTO.
Note: AUTO will select either the DEHUMID or HUMID mode automatically.
6.
Select the desired mode.
Changing the dehumidifier setpoint
Verify that the humidity mode selected is either DEHUMID or AUTO.
1.
Press the MENU button.
2.
Select SETTINGS.
3.
Select USER.
4.
Select HUMIDITY.
5.
Select SETPOINT.
6.
Select DEHUMID.
7.
Use the up and down buttons to adjust the desired dehumidifier setpoint.
Changing the humidifier setpoint
Verify that the humidity mode selected is either HUMID or AUTO.
1.
Press the MENU button.
2.
Select SETTINGS.
3.
Select USER.
4.
Select HUMIDITY.
5.
Select SETPOINT.
6.
Select HUMID.
7.
Use the up and down buttons to adjust the desired humidifier setpoint.
Note: The thermostat enforces a 20% "deadband" or minimum difference between the minimum and maximum humidity
If you have any questions, stop and call 1-877-602-5276 for help.
11
Advertisement
Need help?
Do you have a question about the Smart Thermostat and is the answer not in the manual?
Questions and answers