Table of Contents
Advertisement
4. Press the number key corresponding to your
selection.
A window allowing you to enter hexadecimal digits
appears. The heading depends on the item you
previously selected:
FIRE ALARM D1 (
0 THRU 9
<HISTORY>:
<TEST>:
<DISABLE>:
<DRILL>:
<SILENCE>:
<RESET>:
5. Enter the digit to be reported for the selected
condition by pressing a number key or a special
keys if a hexadecimal character is needed.
6. Press [#] to access and the preceding display.
7.7.2
4/2 Report Codes
4/2 Report codes apply to system conditions only when
you select the 3/1 or 4/2 format. You can program two
digits sent for each condition. Table 28 identifies the
reports you can program.
Table 28:
4/2 Reports
Report
System in Test, System in
Test Restore
Silence
Fire Drill, Fire Drill
Restore
Open Reset Report
Low Battery, Low Battery
Restore, AC Failure, AC
Failure Restore
Test Report
Off-normal at Test
Phone Trouble, Restore
System Trouble, Restore
Bosch | 7/05 | 31499J
D7024 | Operation and Installation Guide | 7.0 Control Panel Programming
)
A
B
C
D
E
F
Description
Sent for Walt Test operations.
Sent when you press
[SILENCE].
Sent for fire drill operations.
Sent when you press [RESET].
Sent for power problems.
Sent for manual or automatic
Communicator Tests.
Sent if the control panel is off-
normal at the Automatic Test
time.
Sent for telephone line prob-
lems.
Sent for general system prob-
lems.
4/2 RPT CODS
0- SYSTM IN TST
1- SYS TEST RST
2- SILENCE
3- FIRE DRILL
4- FIRE DRL RST
5- OPEN RST RPT
6- LOW BATTERY
7- LOW BATT RST
8- AC FAILURE
9- MORE
1.
Press [9] to allow you to program additional reports
4/2 RPT CODS
0- AC FAIL RST
1- TEST REPORT
2- OFF NORM TEST
3- PHONE 1 TRBL
4- PN 1 TRB RST
5- PHONE 2 TRBL
6- PN 2 TRB RST
7- SYSTEM TROUB
8- SYS TRB RST
2. Press [9] to return to the preceding group of
reporting codes.
3. Press the number key corresponding to your code
selection.
4. A window allowing you to enter two hexadecimal
digits appears. The heading depends on the item
you previously selected:
SYSTM IN TST (
0 THRU 9
<HISTORY>:
<TEST>:
<DISABLE>:
<DRILL>:
<SILENCE>:
<RESET>:
5. Enter the digits you want reported for the selected
condition by pressing a number key or one of the
special keys if a hexadecimal character is needed.
6. Press [#] to access the preceding display.
)
A
B
C
D
E
F
53
Advertisement
Table of Contents
