Download Print this page

Sealey HST500 Instructions page 3

Advertisement

4.11.
Nozzle Applications
Nozzle (fig.1 reference)
Floor brush (2)
Long and short nozzles (4 & 5)
Round brush (6)
Window nozzle (8)
Triangular brush (9)
Fabric nozzle (11)
4.12.
When cleaning is finished ensure all switches are ‘Off’, unplug from mains, clean if necessary and store in a safe, dry, childproof area.
4.13.
If cleaner is to be stored for some time, drain water from tank by removing drain plug - on underside of unit (fig.2.E) - with tool (fig.2.F) supplied.
5.
MAINTENANCE
5.1.
Keep the unit and accessories clean and free from damage.
5.2.
At regular intervals, depending on extent of use and local water hardness, descale the tank using a suitable descaling agent.
Declaration of Conformity
Steam Cleaning System
Model HST500
73/23/EEC LV Directive
89/336/EEC EMC Directive
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
Typical applications
Floors and similar large areas
General, detailed - car engine & wheels, sanitary
General, flat - carpets, interior glass
Fabrics - clothes, vehicle upholstery
We, the UK distributor, declare that the product listed below is in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected
on request by contacting Jack Sealey Ltd.
Sole UK Distributor, Sealey Group,
Bury St. Edmunds, Suffolk.
01284 703534
fittings etc.
Detail cleaning
Windows
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole distributor of Sealey Power Products.
E-mail: sales@sealey.co.uk
Comments
For normal cleaning of domestic floors cover brush
with cleaning cloth, retained by spring clips on nozzle.
May be used with round brush (6) for stubborn dirt.
Use on nozzles 4 & 5.
Squeegee nozzle for exterior of windows. In winter
preheat by holding nozzle 50-100mm from glass and
activating steam. For interior, use triangular nozzle
with cleaning cloth over bristles.
Use with cleaning cloth, over bristles and retained by
spring clips, for glass and carpets.
Use with elasticated cleaning cloth
13th September 1999
HST500 - 0089 - (1) - 090999

Advertisement

loading